text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Spring Plunger
ID: FX-PLUNGER
Prijs:  £ 86,00
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Onderdeelnummer:  FX-PLUNGER
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Prijs:  £ 57,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Onderdeelnummer:  FX-LATLGE
  • Lengte:  20 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Slider Block (M4)
ID: FV-SLIDER
Prijs:  £ 16,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Onderdeelnummer:  FV-SLIDER
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  £ 16,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Onderdeelnummer:  FV-SO/MAG
  • Lengte:  10 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  £ 42,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Onderdeelnummer:  FV-SPRING
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Prijs:  £ 250,00
Beknopt overzicht:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
  • Onderdeelnummer:  FX-KINKITPLUS
  • Basisplaat comptabiliteit:  KB-UNIVL
Op voorraad - verzending 1-2 dagen
Ethernet Gigabit Adapter USB-A to RJ45
ID: H00017063
Prijs:  £ 64,00
Beknopt overzicht: 

Gigabit Ethernet to USB adaptor. For use with all Series 8 Absolute Arm models using control packs CP1, CP2, CP3, CP-C, CP-B or CP-W. It is not suitable with control pack CP0.

  • Compatibiliteit:  Absolute Arm RA8
  • Onderdeelnummer:  H00017063
  • USB / LAN:  USB
  • Scannercompatibiliteit:  RS5, RS6, RS-SQUARED, HP-L-8.9
Op voorraad - verzending 1-2 dagen
RA8 ODU USB/Ethernet Cable (L = 5 m)
ID: H00008591
Prijs:  £ 501,00
Beknopt overzicht: 

Combined USB and Ethernet cable with ODU connector, length 5 m. Suitable for all RA8 Absolute Arm models configured for laser scanning and equipped with the control packs CP1, CP2 or CP3. It is not suitable for control packs CP0, CP-C, CP-B and CP-W.

  • Compatibiliteit:  Absolute Arm RA8
  • Onderdeelnummer:  H00008591
  • Lengte:  5
  • Stekkertype:  ODU
  • USB / LAN:  USB / LAN
Levertijd 10-15 dagen
RA8 ODU USB Cable (L = 5 m)
ID: H00008520
Prijs:  £ 186,00
Beknopt overzicht: 

USB cable with ODU connector, length 5 m. For use with all Series 8 Absolute Arm models using control packs CP0, CP1, CP2 or CP3. It is not suitable for control packs CP-C, CP-B and CP-W.

  • Compatibiliteit:  Absolute Arm RA8
  • Onderdeelnummer:  H00008520
  • Lengte:  5
  • Stekkertype:  ODU
  • USB / LAN:  USB
Levertijd 10-15 dagen
SWIFT-CHECK
ID: GB0096-2001
Prijs:  £ 5.233,00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
ID: GB0122-1000
Prijs:  £ 7.773,00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
Jogbox (NJB) Kit with cable, 4 m
ID: G59682600
Prijs:  £ 1.344,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (4 m).

  • Onderdeelnummer:  G59682600
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prijs:  £ 1.358,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (6 m).

  • Onderdeelnummer:  G59682700
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prijs:  £ 1.544,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (15 m).

  • Onderdeelnummer:  G59682800
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
ID: G39031501
Prijs:  £ 1.160,00
Beknopt overzicht: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 25 mm) and a robust stand that allows precise positioning of the sphere at 0°, 45° and 90°. With M8 mounting for secure machine fixing.

  • Onderdeelnummer:  G39031501
  • Materiaal van de bol:  Keramiek
  • Kogel Diameter (D):  25
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Prijs:  £ 724,00
Beknopt overzicht: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made of ceramic and a stand made of high-strength steel (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.

  • Onderdeelnummer:  G39032100
  • Materiaal van de bol:  Keramiek
  • Diameter van de bol:  25
Levertijd 10-15 dagen
Mounting Key
ID: H00062176
Prijs:  £ 3,00
Beknopt overzicht: 

Plastic mounting tool for easy unscrewing of service and battery covers of machine tool touch probe TP-O-400.

  • Onderdeelnummer:  H00062176
  • Materiaal:  Plastic
  • Compatibiliteit:  TP-O-400
  • Lengte:  30
Op voorraad - verzending 1-2 dagen
Open end insert, 9 x 12 mm, Size 13 mm
ID: H00045702
Prijs:  £ 28,00
Beknopt overzicht: 

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

  • Onderdeelnummer:  H00045702
  • Grootte:  122 x 83 x 22 mm
  • Materiaal:  Staal
Op voorraad - verzending 1-2 dagen
Torque wrench for insert tools (2.5–25 Nm)
ID: H00045703
Prijs:  £ 152,00
Beknopt overzicht: 

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

  • Onderdeelnummer:  H00045703
  • Compatibiliteit:  RWP20.50-G-UTP
  • Lengte:  283
Op voorraad - verzending 1-2 dagen
Calibration Set for T-Nut 22 mm (0.86")
ID: CALIBRATION SET 22
Prijs:  £ 464,00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-nut (22 mm) for mounting on the machine tool table. Set content see description.
  • Onderdeelnummer:  CALIBRATION SET 22
  • Bevestiging:  T-slot bevestiging
  • Diameter van de bol:  30
Levertijd 10-15 dagen