text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  € 279,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  € 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Onderdeelnummer:  FV-CONEADJ
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  € 18,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Onderdeelnummer:  FV-SOSUP
  • Lengte:  6 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  € 594,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200P
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Centering Pin
ID: FV-MALE
Prijs:  € 24,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-MALE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prijs:  € 2.530,00
Beknopt overzicht:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-FULLKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Flexible Vice
ID: FV-SLIDE
Prijs:  € 420,00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Onderdeelnummer:  FV-SLIDE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  € 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  € 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTSML
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  € 47,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  € 18,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/20
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  € 84,00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  € 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  € 33,00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Onderdeelnummer:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  € 58,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Onderdeelnummer:  FX-LATMED
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  € 1.061,00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-BRONZE/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x150mm
ID: FX-PR30__150
Prijs:  € 43,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Onderdeelnummer:  FX-PR30/150
  • Grootte:  30 x 30 x 150 mm
Op voorraad - verzending 1-2 dagen
Tension Post (M8)
ID: FX-POST
Prijs:  € 27,00
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Onderdeelnummer:  FX-POST
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen