text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Measuring Unit Extension (L = 140 mm / 5.51")
ID: 41.00-VE140
Prijs:  zł 2.038,00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.

  • Onderdeelnummer:  41.00-VE140
  • Materiaal:  Koolstofvezel
  • Lengte:  140
  • Diameter:  25 mm
  • Mannelijke schroefdraad:  M16x1
Levertijd 10-15 dagen
Qualification Sphere with Shaft (D = 25 mm)
ID: 03939542
Prijs:  zł 7.525,00
Beknopt overzicht: 

Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.

  • Onderdeelnummer:  03939542
  • Toepassing:  Laser Scanner Probe Kalibratie
  • Materiaal:  Keramiek, mat wit
  • Kogel Diameter:  25
  • Lengte:  150
Op voorraad - verzending 1-2 dagen
C-Spanner
ID: 2951
Prijs:  zł 30,00
Beknopt overzicht:  C-Spanner for the exchange of measuring units on probes for machine tools.
  • Onderdeelnummer:  2951
  • Materiaal:  Gehard Staal
  • Lengte:  136
Op voorraad - verzending 1-2 dagen
Dial Gauge (Digital / Analogue)
ID: 6458
Prijs:  zł 2.451,00
Beknopt overzicht: 

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"

  • Meet technologie:  Digitaal / Analoog
  • Onderdeelnummer:  6458
  • Meeteenheid:  mm
  • Meetbereik:  ± 0,25 mm / ± .010"
  • Meetkracht:  0.07
Op voorraad - verzending 1-2 dagen
Storage Box
ID: 5682
Prijs:  zł 490,00
Beknopt overzicht: 

Case for storage and transport of Hexagon measuring systems for machine tools. Dimensions: 390 x 310 x 147 mm

  • Onderdeelnummer:  5682
  • Grootte:  390 x 310 x 147 mm
  • Materiaal:  Plastic
Op voorraad - verzending 1-2 dagen
T-Nut 18 mm
ID: 4431
Prijs:  zł 65,00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiaal:  Gehard Staal
  • Onderdeelnummer:  4431
  • Vrouwelijke schroefdraad:  M12
  • Nominale T-groefmaat:  18
Op voorraad - verzending 1-2 dagen
Calibration Pin (D = 5 mm)
ID: 5209
Prijs:  zł 430,00
Beknopt overzicht:  Calibration pin (Ø5 mm) made of hardened stainless steel for calibration of laser tool setters on machine tools. Length 50 mm.
  • Onderdeelnummer:  5209
  • Toepassing:  Kalibratie Lasergereedschap
  • Materiaal:  Gehard Roestvrij Staal
  • Diameter:  5
  • Lengte:  50
Op voorraad - verzending 1-2 dagen
Storage Box
ID: 5736
Prijs:  zł 133,00
Beknopt overzicht: 

Case for storage and transport of Hexagon measuring systems for machine tools. Dimensions: 229 x 199 x 70 mm

  • Onderdeelnummer:  5736
  • Grootte:  229 x 199 x 70 mm
  • Materiaal:  Plastic
Op voorraad - verzending 1-2 dagen
T-Nut 16 mm
ID: 5453
Prijs:  zł 56,00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiaal:  Gehard Staal
  • Onderdeelnummer:  5453
  • Vrouwelijke schroefdraad:  M12
  • Nominale T-groefmaat:  16
Op voorraad - verzending 1-2 dagen
Battery (9 V / 1200 mAh / Lithium)
ID: 5677
Prijs:  zł 52,00
Beknopt overzicht:  Battery (9 V / 1200 mAh / Lithium) for use in measurement devices for machine tools.
  • Onderdeelnummer:  5677
Op voorraad - verzending 1-2 dagen
Calibration Pin (D = 4 mm / D = 10 mm)
ID: 4420
Prijs:  zł 1.036,00
Beknopt overzicht:  Calibration pin (Ø4 mm/10 mm) made of hardened stainless steel for calibration of Laser Tool Setters on machine tools. Length 70 mm.
  • Onderdeelnummer:  4420
  • Toepassing:  Kalibratie Lasergereedschap
  • Materiaal:  Gehard Roestvrij Staal
  • Diameter:  4 / 10
  • Lengte:  70
Op voorraad - verzending 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  zł 211,00
Beknopt overzicht:  M8-Extension made of stainless steel for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Onderdeelnummer:  5248
  • Materiaal:  Roestvast staal
  • Diameter:  25
  • Lengte:  75
  • Mannelijke schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Battery (3 V / CR2032)
ID: 5309
Prijs:  zł 17,00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Onderdeelnummer:  5309
Op voorraad - verzending 1-2 dagen
Mounting Bracket
ID: 91.50-M
Prijs:  zł 211,00
Beknopt overzicht: 

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.50 in machine tools.

  • Onderdeelnummer:  91.50-M
  • Receiver Compatibility:  IRR91.50
Op voorraad - verzending 1-2 dagen
Mounting Bracket
ID: 95.51-M
Prijs:  zł 305,00
Beknopt overzicht: 

Mounting bracket made of stainless steel for mounting and alignment of Hexagon receivers RC-R-100 and RC-R-100-CORE in machine tools.

  • Onderdeelnummer:  95.51-M
  • Receiver Compatibility:  RC-R-100, RC-R-100-CORE
Levertijd 10-15 dagen
Taper Shank SK40 / CAT40
ID: D28-SK__CAT40-A__B
Prijs:  zł 963,00
Beknopt overzicht: 

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

  • Onderdeelnummer:  D28-SK/CAT40-A/B
  • Interface:  D28
Op voorraad - verzending 1-2 dagen
Taper Shank SK30 AZ-01
ID: D28-SK30-A
Prijs:  zł 1.634,00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.

  • Onderdeelnummer:  D28-SK30-A
  • Interface:  D28
Op voorraad - verzending 1-2 dagen
Taper Shank DIN 2080 SK50
ID: D28-SK50__2080-A__B
Prijs:  zł 1.634,00
Beknopt overzicht: 

Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

  • Onderdeelnummer:  D28-SK50/2080-A/B
  • Interface:  D28
Op voorraad - verzending 1-2 dagen
Taper Shank SK30
ID: D28-SK30-W
Prijs:  zł 1.157,00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

  • Onderdeelnummer:  D28-SK30-W
  • Interface:  D28
Op voorraad - verzending 1-2 dagen
Hollow Taper Shank HSK63 Form E
ID: D28-HSK63E-B
Prijs:  zł 1.634,00
Beknopt overzicht: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

  • Onderdeelnummer:  D28-HSK63E-B
  • Interface:  D28
  • Vorm:  E
Op voorraad - verzending 1-2 dagen