Bewerkingsmachine

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 10 m / 32.8'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 50 m / 164'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'

Extension cable for Hexagon sensor cables with M12/F12 plug. Length: 30 m / 98.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Adapter cable with M12/F12 and M12/M08 plugs. Length: 0.2 m / 0.66'

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT30 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Adapter from CC11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with CC11 connection.

Plastic mounting tool for easy unscrewing of service and battery covers of machine tool touch probe TP-O-400.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic probe head on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic probe head on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Replacement Service Cover for the m&h Touch probe with optical transmission TP-O-400. Provides access to internal components for maintenance and service operations while protecting the probe interior from dust and damage.