text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prijs:  £ 17,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/16
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  £ 17,00
Beknopt overzicht: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Onderdeelnummer:  FV-SO/PIN
  • Schroefdraad:  M4
  • Diameter:  8 mm
  • Lengte:  10 mm
Op voorraad - verzending 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  £ 47,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Onderdeelnummer:  FV-CNRBRKT
Op voorraad - verzending 1-2 dagen
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Prijs:  £ 117,00
Beknopt overzicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Onderdeelnummer:  FX-CLAMP
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Vee Block Single
Vee Block Single
ID: FV-VEE
Prijs:  £ 29,00
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Onderdeelnummer:  FV-VEE
Op voorraad - verzending 1-2 dagen
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prijs:  £ 17,00
Beknopt overzicht: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.
  • Onderdeelnummer:  FV-POST
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  £ 432,00
Beknopt overzicht: 

The Swift-Fix Basic Kit provides the essential components required for basic fixture applications. The components are supplied in a sturdy case, keeping them well organized and readily accessible.
  • Onderdeelnummer:  FX-BASIC/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  £ 580,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200F
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  £ 129,00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Onderdeelnummer:  FX-ARM
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  £ 14,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Onderdeelnummer:  FV-CONE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prijs:  £ 56,00
Beknopt overzicht: 

The adjustable standoff provides maximum flexibility when raising workpieces and positioning other Swift-Fix components.
  • Onderdeelnummer:  FX-HEIGHT
  • Schroefdraad:  M8
  • Diameter:  16 mm
  • Lengte:  50 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prijs:  £ 16,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/30
  • Schroefdraad:  M8
  • Diameter:  20 mm
  • Lengte:  30 mm
Levertijd 10-15 dagen
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prijs:  £ 86,00
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Onderdeelnummer:  FX-UNI/JOINT
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  £ 45,00
Beknopt overzicht: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.
  • Onderdeelnummer:  FX-PR30PLATE
  • Grootte:  130 x 30 mm
Op voorraad - verzending 1-2 dagen
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Prijs:  £ 380,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Onderdeelnummer:  FC-JS-125SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Prijs:  £ 431,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Onderdeelnummer:  FC-JS-160SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Prijs:  £ 331,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Onderdeelnummer:  FC-JS-70SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prijs:  £ 380,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Onderdeelnummer:  FC-JS-125SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Prijs:  £ 431,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Onderdeelnummer:  FC-JS-160SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  £ 755,00
Beknopt overzicht: 

Clamping and stop pin set for Hexagon 6-jaw chucks Ø125 mm. Designed for the precise and repeatable positioning of a wide variety of workpieces while providing optimal accessibility during measurement.
  • Onderdeelnummer:  FC-PS-125AL6
Levertijd 10-15 dagen