text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  £ 436,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  £ 509,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Levertijd 10-15 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  £ 43,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  £ 254,00
Beknopt overzicht: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  £ 9,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Schroefdraad:  M4
  • Diameter:  8 mm
  • Lengte:  20 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  £ 20,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Onderdeelnummer:  FV-CONEADJ
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prijs:  £ 550,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200C
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  £ 20,00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Onderdeelnummer:  FV-ANGSLIDER
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  £ 1.493,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP500/500
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  £ 17,00
Beknopt overzicht: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Onderdeelnummer:  FV-SO/PIN
  • Schroefdraad:  M4
  • Diameter:  8 mm
  • Lengte:  10 mm
Op voorraad - verzending 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  £ 47,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Onderdeelnummer:  FV-CNRBRKT
Op voorraad - verzending 1-2 dagen
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Prijs:  £ 117,00
Beknopt overzicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Onderdeelnummer:  FX-CLAMP
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  £ 129,00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Onderdeelnummer:  FX-ARM
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  £ 16,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Onderdeelnummer:  FV-SLIDER
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  £ 16,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Onderdeelnummer:  FV-SO/MAG
  • Schroefdraad:  M4
  • Diameter:  8 mm
  • Lengte:  10 mm
Op voorraad - verzending 1-2 dagen
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  £ 42,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Onderdeelnummer:  FV-SPRING
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  £ 14,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Onderdeelnummer:  FV-CONE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Prijs:  £ 431,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Onderdeelnummer:  FC-JS-160SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Prijs:  £ 331,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Onderdeelnummer:  FC-JS-70SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  £ 755,00
Beknopt overzicht: 

Clamping and stop pin set for Hexagon 6-jaw chucks Ø125 mm. Designed for the precise and repeatable positioning of a wide variety of workpieces while providing optimal accessibility during measurement.
  • Onderdeelnummer:  FC-PS-125AL6
Levertijd 10-15 dagen