text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  € 480,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  € 560,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Levertijd 10-15 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  € 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Onderdeelnummer:  FV-CONEADJ
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  € 18,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Onderdeelnummer:  FV-SOSUP
  • Lengte:  6 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  € 594,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200P
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Centering Pin
Centering Pin
ID: FV-MALE
Prijs:  € 24,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-MALE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  € 1.254,00
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-STARTERKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  € 1.220,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125SS3
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  € 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prijs:  € 1.420,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prijs:  € 1.140,00
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prijs:  € 1.490,00
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160AL6-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prijs:  € 3.300,00
Beknopt overzicht:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-240AL3-NF
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
Levertijd 10-15 dagen
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  € 1.642,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP500/500
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prijs:  € 418,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Onderdeelnummer:  FC-JS-125SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Prijs:  € 474,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Onderdeelnummer:  FC-JS-160SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prijs:  € 730,00
Beknopt overzicht: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Onderdeelnummer:  FC-JS-125AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  € 830,00
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Onderdeelnummer:  FC-PS-125AL6
Levertijd 10-15 dagen