text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-CHECK
SWIFT-CHECK
SKU: GB0096-2001
Prix:  €5,330.00
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Livraison > 25 jours
Vee Locator
Vee Locator
SKU: FV-FEMALE
Prix:  €33.00
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-FEMALE
En stock
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Prix:  €262.00
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Prix:  €22.00
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Onderdeelnummer:  FV-CONEADJ
  • Schroefdraad:  M4
En stock
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Prix:  €39.00
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Onderdeelnummer:  FV-LATSML
  • Lengte:  10 mm
  • Diameter:  8 mm
En stock
Centering Pin
Centering Pin
SKU: FV-MALE
Prix:  €24.00
Vue d'ensemble sommaire:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-MALE
  • Schroefdraad:  M4
En stock
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
SKU: FV-FULLKIT
Prix:  €2,370.00
Vue d'ensemble sommaire:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-FULLKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
En stock
Angle Block Slider (M4)
Angle Block Slider (M4)
SKU: FV-ANGSLIDER
Prix:  $26.00
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Onderdeelnummer:  FV-ANGSLIDER
  • Schroefdraad:  M4
En stock
Corner Bracket
Corner Bracket
SKU: FV-CNRBRKT
Prix:  $60.00
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Onderdeelnummer:  FV-CNRBRKT
En stock
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
SKU: FC-125SS3
Prix:  $1,488.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125SS3
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
En stock
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
SKU: FC-125AL6
Prix:  $1,488.00
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
En stock
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
SKU: FC-160AL6
Prix:  $1,834.00
Vue d'ensemble sommaire:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160AL6
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
En stock
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
SKU: FC-240AL3
Prix:  $4,232.00
Vue d'ensemble sommaire:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-240AL3
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
En stock
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
SKU: FC-160SS3
Prix:  $1,834.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
En stock
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
SKU: FC-70SS3
Prix:  $1,155.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-70SS3
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
En stock
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
SKU: FC-70SS3-NF
Prix:  $1,142.00
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-70SS3-NF
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
Available
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
SKU: FC-160SS3-NF
Prix:  $1,745.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Available
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
SKU: FC-125AL6-NF
Prix:  $1,399.00
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
SKU: FC-160AL6-NF
Prix:  $1,834.00
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160AL6-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging (G):  M6
Available
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
SKU: FC-240AL3-NF
Prix:  $4,052.00
Vue d'ensemble sommaire:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-240AL3-NF
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
Available