text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  zł2,064.00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  zł2,408.00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  zł3,999.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  zł142.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTSML
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  zł202.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  zł142.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  zł3,354.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  zł4,343.00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-BRONZE/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  zł43.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  zł77.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Onderdeelnummer:  FV-SOSUP
  • Lengte:  6 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  zł4,558.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prijs:  zł267.00
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Onderdeelnummer:  FX-HEIGHT
  • Lengte:  50 mm
  • Diameter:  16 mm
Levertijd 10-15 dagen
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  zł7,783.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/600
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  zł26.00
Beknopt overzicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Onderdeelnummer:  FX-BPRTR
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  zł5,074.00
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-STARTERKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prijs:  zł82.00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/16
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prijs:  zł82.00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/20
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prijs:  zł10,965.00
Beknopt overzicht:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-GOLD/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Prijs:  zł1,127.00
Beknopt overzicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Onderdeelnummer:  FX-KINKIT
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  zł6,536.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP500/500
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen