text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  £845.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  £709.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  £964.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  £509.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200P
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  £1,727.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP600/600
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  £927.00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Onderdeelnummer:  FX-PILLAR/KIT
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
ID: FX-THUMB
Prijs:  £9.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Onderdeelnummer:  FX-THUMB
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  £9.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  £9.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  £5.00
Beknopt overzicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Onderdeelnummer:  FX-BPRTR
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prijs:  £9.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/15
  • Lengte:  15 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Resting Cone (M4)
ID: FV-CONE
Prijs:  £14.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Onderdeelnummer:  FV-CONE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
ID: GB0096-2001
Prijs:  £4,845.00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  £845.00
Beknopt overzicht: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Onderdeelnummer:  FC-70SS3-NF
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
Levertijd 10-15 dagen
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prijs:  £380.00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Onderdeelnummer:  FC-JS-125SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Prijs:  £431.00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.

  • Onderdeelnummer:  FC-JS-160SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prijs:  £664.00
Beknopt overzicht: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.

  • Onderdeelnummer:  FC-JS-125AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  £755.00
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).

  • Onderdeelnummer:  FC-PS-125AL6
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Prijs:  £855.00
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).

  • Onderdeelnummer:  FC-PS-160AL6
Levertijd 10-15 dagen
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Prijs:  £927.00
Beknopt overzicht: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.

  • Onderdeelnummer:  FC-JS-240AL3-I
  • Materiaal:  Aluminium with hard coated surface
Levertijd 10-15 dagen