text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  €49.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Onderdeelnummer:  FX-SPRING
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prijs:  €10.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Onderdeelnummer:  FX-THUMB
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prijs:  €58.00
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Onderdeelnummer:  FX-SUB45/120
  • Grootte:  120 x 45 x 12 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prijs:  €1,160.00
Beknopt overzicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-STARTER/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Support Stop
Support Stop
ID: FX-SUP__STOP
Prijs:  €84.00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Onderdeelnummer:  FX-SUP/STOP
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prijs:  €26.00
Beknopt overzicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Onderdeelnummer:  FX-TOOLS
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prijs:  €17.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/30
  • Lengte:  30 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prijs:  €92.00
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Onderdeelnummer:  FX-UNI/JOINT
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FX-VEE
Prijs:  €75.00
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Onderdeelnummer:  FX-VEE
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prijs:  €18.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/50
  • Lengte:  50 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  €5,330.00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prijs:  €8,470.00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  €900.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  €32.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTSML
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  €46.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  €17.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/20
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  €82.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €32.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  €750.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  €25.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/100
  • Lengte:  100 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen