zł 4.988,00
Beknopt overzicht
Sturdy, tactile cable tool setter made of stainless steel with measuring insert Ø 13 mm. Designed for quick tool length and tool radius measurements and reliable tool breakage control. Equipped with base plate for fast and easy vertically mounting and alignment on the machine table. Cable length: 10 m / 32.8' (incl. protection tube 3 m / 9.8')
The tool setter TS35.20 is designed for use on milling and machining centres and is used to determine tool geometries. The precision measuring mechanism reliably measures tool lengths and tool radii, measures individual cutting edges and detects tool breakage. The measurement can be performed statically or dynamically as well
All tasks can be undertaken in the shortest possible time using the m&h measuring cycles. Precise tool length measurement and tool breakage detection provide certainty during machining. The design in stainless steel and the chip guard cover provide maximum protection and permit usage with the highest requirements.
Application
- Determination of tool length
- Measurement of tool radius
- Detection of broken tools
Features
- Compact design with low overall height
- Sturdy stainless steel housing
- Base plate for fast vertical mounting and easy alignment on the machine table
- Waterproof sealing according to IP68
- Cylindrical measuring insert, Ø 13 mm
- Radial protection of the measuring mechanism by break shaft
- Cable length: 10 m / 32.8' (incl. protection tube: 3 m / 9.8')
Delivery Contents
1x m&h Tool Setter TS35.20 with connecting cable 10 m / 32.8' (incl. protection tube 3 m / 9.8')
1x Base Plate (5339)
1x Cylindrical measuring insert Ø 13 mm (H00027357)
1x Break shaft adapter M4 with break shaft – High Force (H00027459)
Mounting material
Please note:
The m&h tool setter TS35.20 is designed for vertical mounting only. All images are for illustrative purposes only and may differ from the actual product.
| Producttype | Bekabelde gereedschapstaster |
|---|---|
| Onderdeelnummer | 35.20-TS-PT# |
| Tast richting | ±X, ±Y, -Z |
| Diameter van het meetinzetstuk | 13 mm |
| Kabellengte | 10 m (32,8’) incl. beschermslang (3 m / 9,8’) |
| Max. Stylus Overtravel |
XY = 6 mm Z = 5 mm |
| Triggerkracht |
XY = 0,5–1,1 N Z = 5 N |
| Stroomvoorziening | 12–32 VDC, max. 25 mA |
| Temperatuurbereik |
Werking: 10 °C - 50 °C Opslag: 5°C - 70°C |
| Unidirectionele herhaalnauwkeurigheid | 1 µm (max. 2 sigma) |
| Beschermingsklasse | IP68: EN60529 |
| Min. gereedschapsdiameter | 0,5 mm (0,02") bij 100 mm/min |
| Materiaal | Roestvast staal |
| Gewicht | ca. 300 g (zonder kabel) |
