text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  zł2,363.04
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  zł2,756.16
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Tempi di consegna 10-15 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  zł6,009.12
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125SS3
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  zł6,009.12
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  zł7,339.68
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160AL6
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  zł7,339.68
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prezzo:  zł6,994.08
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prezzo:  zł5,616.00
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prezzo:  zł7,339.68
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160AL6-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging (G):  M6
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prezzo:  €1,300.00
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125SS3-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
Tempi di consegna 10-15 Giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  930,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  33,00 €
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  780,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  39,00 €
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Onderdeelnummer:  FV-LATSML
  • Lengte:  10 mm
  • Diameter:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prezzo:  1.060,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/400
  • Schroefdraad:  M8
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.810,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/600
  • Schroefdraad:  M8
Disponibile - Spedizione in 1-2 Giorni
Centering Pin
Centering Pin
ID: FV-MALE
Prezzo:  24,00 €
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-MALE
  • Schroefdraad:  M4
Disponibile - Spedizione in 1-2 Giorni
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prezzo:  6,00 €
Descrizione:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Onderdeelnummer:  FX-BPRTR
  • Schroefdraad:  M8
Disponibile - Spedizione in 1-2 Giorni