text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  84,00 CHF
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  26,00 CHF
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Prezzo:  60,00 CHF
Descrizione:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x200mm
ID: FX-PR30__200
Prezzo:  46,00 CHF
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/200
  • Dimensione:  30 x 30 x 200 mm
Disponibile - Spedizione in 1-2 Giorni
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5.330,00 CHF
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Codice prodotto:  GB0096-2001
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Consegna > 25 giorni
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  22,00 CHF
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  33,00 CHF
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
Disponibile - Spedizione in 1-2 Giorni
SWIFT-SET
ID: GB0122-1000
Prezzo:  8.550,00 CHF
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Codice prodotto:  GB0122-1000
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Consegna > 25 giorni
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  62,00 CHF
Descrizione:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Codice prodotto:  FX-HEIGHT
  • Lunghezza:  50 mm
  • Diametro:  16 mm
Tempi di consegna 10-15 Giorni
Centering Pin
ID: FV-MALE
Prezzo:  24,00 CHF
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Codice prodotto:  FV-MALE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prezzo:  6,00 CHF
Descrizione:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Codice prodotto:  FX-BPRTR
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.180,00 CHF
Descrizione:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-STARTERKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  10,00 CHF
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/15
  • Lunghezza:  15 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  19,00 CHF
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Codice prodotto:  FX-CAPM8/16
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2.370,00 CHF
Descrizione:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-FULLKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Flexible Vice
ID: FV-SLIDE
Prezzo:  420,00 CHF
Descrizione:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Codice prodotto:  FV-SLIDE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  19,00 CHF
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Codice prodotto:  FX-CAPM8/20
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prezzo:  2.550,00 CHF
Descrizione:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-GOLD/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Kinematic Support Kit
ID: FX-KINKIT
Prezzo:  262,00 CHF
Descrizione:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Codice prodotto:  FX-KINKIT
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  1.520,00 CHF
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni