text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Pillar 30x30x200mm
ID: FX-PR30__200
Prezzo:  46,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/200
  • Dimensione:  30 x 30 x 200 mm
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  22,00 €
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Codice prodotto:  FV-ANGSLIDER
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  1.520,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  19,00 €
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Codice prodotto:  FV-SO/PIN
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  52,00 €
Descrizione:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Codice prodotto:  FV-CNRBRKT
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
ID: FV-VEE
Prezzo:  32,00 €
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Codice prodotto:  FV-VEE
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
ID: FV-POST
Prezzo:  19,00 €
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Codice prodotto:  FV-POST
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  475,00 €
Descrizione:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Codice prodotto:  FX-BASIC/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  600,00 €
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200F
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  142,00 €
Descrizione:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Codice prodotto:  FX-ARM
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  18,00 €
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Codice prodotto:  FV-SLIDER
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  18,00 €
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Codice prodotto:  FV-SO/MAG
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  46,00 €
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FV-SPRING
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
ID: FV-CONE
Prezzo:  15,00 €
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Codice prodotto:  FV-CONE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  940,00 €
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-70SS3
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
Disponibile - Spedizione in 1-2 Giorni
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Prezzo:  660,00 €
Descrizione:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Codice prodotto:  KB-250/250
  • Compatibilità piastra di fissaggio:  KPP-300/300, KPT-300/300
Disponibile - Spedizione in 1-2 Giorni
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Prezzo:  711,00 €
Descrizione:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Codice prodotto:  KB-300/300
  • Compatibilità piastra di fissaggio:  KPP-400/400, KPT-400/400
Disponibile - Spedizione in 1-2 Giorni
M4-Stylus Extension (CE-6-SS-7-L80)
ID: H00027473
Prezzo:  179,00 €
Descrizione:  Stylus extension with M4 thread, ceramic stem Ø6 mm, stainless steel ends Ø7 mm, length 80 mm. For use on machine tools. Previous part number: EX-M4-CE-L80
  • Codice prodotto:  H00027473
  • Filetto:  M4
  • Diameter Stem (D):  6
  • Materiale stelo:  Ceramica
  • Lunghezza (L):  80
Disponibile - Spedizione in 1-2 Giorni
M2-Stylus (R-1-TC-0.7-L30)
ID: H00027469
Prezzo:  71,00 €
Descrizione:  Straight stylus with M2 thread, ruby ball Ø1 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 91.00-T30.5/1-HM-M2
  • Codice prodotto:  H00027469
  • Filetto:  M2
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  1
  • Lunghezza (L):  30
Disponibile - Spedizione in 1-2 Giorni
M2-Stylus (R-2-TC-1-L15)
ID: H00027467
Prezzo:  43,00 €
Descrizione:  Straight stylus with M2 thread, ruby ball Ø2 mm, tungsten carbide stem, length 15 mm. For use on machine tools. Previous part number: 91.00-T16/2-HM-M2
  • Codice prodotto:  H00027467
  • Filetto:  M2
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  2
  • Lunghezza (L):  15
Disponibile - Spedizione in 1-2 Giorni