text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Prix:  480,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Available
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Prix:  560,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
Available
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Prix:  10,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
En stock
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Prix:  22,00 €
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
En stock
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Prix:  10,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
En stock
Standoff Support (M4)
Standoff Support (M4)
SKU: FV-SOSUP
Prix:  18,00 €
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
En stock
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
SKU: FV-BP200__200P
Prix:  594,00 €
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200P
  • Filetto:  M4
En stock
Centering Pin
Centering Pin
SKU: FV-MALE
Prix:  24,00 €
Vue d'ensemble sommaire:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Codice prodotto:  FV-MALE
  • Filetto:  M4
En stock
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
SKU: FV-STARTERKIT
Prix:  1.254,00 €
Vue d'ensemble sommaire:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-STARTERKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
En stock
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
SKU: FC-125SS3
Prix:  1.220,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
En stock
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Prix:  1.004,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
En stock
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
SKU: FC-160SS3-NF
Prix:  1.420,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Available
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
SKU: FC-125AL6-NF
Prix:  1.140,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
SKU: FC-160AL6-NF
Prix:  1.490,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Available
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
SKU: FC-240AL3-NF
Prix:  3.300,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-240AL3-NF
  • Diametro esterno griffe (D1):  240
  • Campo di serraggio esterno (A):  1 - 288
  • Campo di serraggio interno (I):  35 - 295
  • Materiale:  Alluminio
Available
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
SKU: FX-BP500__500
Prix:  1.642,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
En stock
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
SKU: FC-JS-125SS3-E
Prix:  418,00 €
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Codice prodotto:  FC-JS-125SS3-E
  • Materiale:  Acciaio inossidabile, temprato sottovuoto, levigato
Available
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
SKU: FC-JS-160SS3-E
Prix:  474,00 €
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Codice prodotto:  FC-JS-160SS3-E
  • Materiale:  Acciaio inossidabile, temprato sottovuoto, levigato
Available
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
SKU: FC-JS-125AL6-IE
Prix:  €730.00
Vue d'ensemble sommaire: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Codice prodotto:  FC-JS-125AL6-IE
  • Materiale:  Alluminio, anodizzato duro
Available
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
SKU: FC-PS-125AL6
Prix:  €830.00
Vue d'ensemble sommaire: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Codice prodotto:  FC-PS-125AL6
Available