Accessori

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D28 connection. With contact surface in higher surface quality and dimensional accuracy. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Conical Set Screw M4x8

Plastic mounting tool for easy unscrewing of service and battery covers of machine tool touch probe TP-O-400.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic probe head on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic probe head on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Replacement Service Cover for the m&h Touch probe with optical transmission TP-O-400. Provides access to internal components for maintenance and service operations while protecting the probe interior from dust and damage.

Flat Set Screw M4x8

Tool kit for installation and maintenance of Laser Scanner m&h LS-R-4.8. Tool box contents see description.

Calibration set with calibration sphere (D = 40 mm) and magnetic base for mounting on the machine tool. Content see description.
Previous part number: 3D-FI EICHKUGEL SET5

Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET1

Calibration set including a calibration sphere (Ø 10 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET4