Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Preis:  560,00 CHF
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
Lieferzeit 10-15 Tage
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Preis:  480,00 CHF
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Lieferzeit 10-15 Tage
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Preis:  605,00 CHF
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200C
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Preis:  1.642,00 CHF
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Preis:  19,00 CHF
Schnellübersicht: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Codice prodotto:  FV-SO/PIN
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  10 mm
Auf Lager - Versand 1-2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  224,00 zł
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Codice prodotto:  FV-CNRBRKT
Auf Lager - Versand 1-2 Tage
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Preis:  555,00 zł
Schnellübersicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Codice prodotto:  FX-CLAMP
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Vee Block Single
Vee Block Single
ID: FV-VEE
Preis:  138,00 zł
Schnellübersicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Codice prodotto:  FV-VEE
Auf Lager - Versand 1-2 Tage
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Preis:  82,00 zł
Schnellübersicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Codice prodotto:  FV-POST
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Preis:  215,00 zł
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
Auf Lager - Versand 1-2 Tage
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Preis:  47,00 zł
Schnellübersicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Preis:  77,00 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  20 mm
Auf Lager - Versand 1-2 Tage
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Preis:  361,00 zł
Schnellübersicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Auf Lager - Versand 1-2 Tage
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Preis:  112,00 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  100 mm
Auf Lager - Versand 1-2 Tage
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Preis:  258,00 zł
Schnellübersicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
Auf Lager - Versand 1-2 Tage
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Preis:  5.573,00 zł
Schnellübersicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-STARTER/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Auf Lager - Versand 1-2 Tage
Support Stop
Support Stop
ID: FX-SUP__STOP
Preis:  374,00 zł
Schnellübersicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Codice prodotto:  FX-SUP/STOP
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Preis:  185,00 zł
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/150
  • Dimensione:  30 x 30 x 150 mm
Auf Lager - Versand 1-2 Tage
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Preis:  82,00 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/20
  • Filetto:  M8
  • Diametro:  20 mm
  • Lunghezza:  20 mm
Auf Lager - Versand 1-2 Tage
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Preis:  112,00 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/100
  • Filetto:  M8
  • Diametro:  20 mm
  • Lunghezza:  100 mm
Auf Lager - Versand 1-2 Tage