text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  82,00 zł
Descrizione: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.

  • Codice prodotto:  FV-SO/PIN
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  10 mm
Disponibile - Spedizione in 1-2 Giorni
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  224,00 zł
Descrizione:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Codice prodotto:  FV-CNRBRKT
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
ID: FV-VEE
Prezzo:  138,00 zł
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Codice prodotto:  FV-VEE
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
ID: FV-POST
Prezzo:  82,00 zł
Descrizione: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.

  • Codice prodotto:  FV-POST
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  2.043,00 zł
Descrizione: 

The Swift-Fix Basic Kit provides the essential components required for basic fixture applications. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Codice prodotto:  FX-BASIC/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  2.743,00 zł
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200F
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  611,00 zł
Descrizione:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Codice prodotto:  FX-ARM
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  77,00 zł
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Codice prodotto:  FV-SLIDER
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  77,00 zł
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Codice prodotto:  FV-SO/MAG
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  10 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Clamp
ID: FV-SPRING
Prezzo:  198,00 zł
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FV-SPRING
  • Filetto:  Senza filettatura
  • Compatibilità albero tensore:  FV-POST
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
ID: FV-CONE
Prezzo:  65,00 zł
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Codice prodotto:  FV-CONE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Prezzo:  15.975,00 zł
Descrizione: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Codice prodotto:  FC-240AL3
  • Diametro esterno griffe (D1):  240
  • Campo di serraggio esterno (A):  1 - 288
  • Campo di serraggio interno (I):  35 - 295
  • Materiale:  Alluminio
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3
Prezzo:  4.244,00 zł
Descrizione: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Codice prodotto:  FC-70SS3
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Prezzo:  3.999,00 zł
Descrizione: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Codice prodotto:  FC-70SS3-NF
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3-NF
Prezzo:  6.106,00 zł
Descrizione: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Tempi di consegna 10-15 Giorni
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  211,00 zł
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Codice prodotto:  FX-PR30/250
  • Dimensione:  30 x 30 x 250 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  163,00 zł
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/50
  • Dimensione:  30 x 30 x 50 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prezzo:  77,00 zł
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/30
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  30 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin M8 (D = 16 mm / L = 20 mm)
ID: FX-SO__PIN
Prezzo:  95,00 zł
Descrizione: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.

  • Codice prodotto:  FX-SO/PIN
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Ethernet Gigabit Adapter USB-A to RJ45
ID: H00017063
Prezzo:  301,00 zł
Descrizione: 

Gigabit Ethernet to USB adaptor. For use with all Series 8 Absolute Arm models using control packs CP1, CP2, CP3, CP-C, CP-B or CP-W. It is not suitable with control pack CP0.

  • Compatibilità:  Absolute Arm RA8
  • Codice prodotto:  H00017063
  • USB / LAN:  USB
  • Compatibilità con scanner:  RS5, RS6, RS-SQUARED, HP-L-8.9
Disponibile - Spedizione in 1-2 Giorni