text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  2.035,00 zł
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  2.376,00 zł
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Livraison sous 10 à 15 jours
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
N° : FX-CTMED
Prix:  138,00 zł
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
En stock - Livraison sous 1 à 2 jours
Standoff Support (M8)
Standoff Support (M8)
N° : FX-SO__SUPP
Prix:  91,00 zł
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FX-SO/SUPP
  • Lunghezza:  10 mm
  • Diametro:  15 mm
En stock - Livraison sous 1 à 2 jours
Standoff Adjustable (M8)
Standoff Adjustable (M8)
N° : FX-HEIGHT
Prix:  259,00 zł
Vue d'ensemble sommaire:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Codice prodotto:  FX-HEIGHT
  • Lunghezza:  50 mm
  • Diametro:  16 mm
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
N° : FX-BP400__600
Prix:  7.560,00 zł
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/600
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
N° : FX-BPRTR
Prix:  26,00 zł
Vue d'ensemble sommaire:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Codice prodotto:  FX-BPRTR
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
N° : FV-STARTERKIT
Prix:  4.925,00 zł
Vue d'ensemble sommaire:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-STARTERKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
N° : FX-SO20__30
Prix:  73,00 zł
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/30
  • Lunghezza:  30 mm
  • Diametro:  20 mm
En stock - Livraison sous 1 à 2 jours
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
N° : FX-CAPM8__16
Prix:  78,00 zł
Vue d'ensemble sommaire:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Codice prodotto:  FX-CAPM8/16
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
Spring Clamp (M8)
N° : FX-SPRING
Prix:  212,00 zł
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
Thumb Screw M8
N° : FX-THUMB
Prix:  43,00 zł
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
N° : FX-SUB45__120
Prix:  251,00 zł
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
En stock - Livraison sous 1 à 2 jours
Pillar Base Plate
Pillar Base Plate
N° : FX-PR30PLATE
Prix:  207,00 zł
Vue d'ensemble sommaire:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Codice prodotto:  FX-PR30PLATE
  • Dimensione:  130 x 30 mm
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
N° : FX-BP500__500
Prix:  6.350,00 zł
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x100mm
Pillar 30x30x100mm
N° : FX-PR30__100
Prix:  168,00 zł
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/100
  • Dimensione:  30 x 30 x 100 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x250mm
Pillar 30x30x250mm
N° : FX-PR30__250
Prix:  237,60 zł
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Codice prodotto:  FX-PR30/250
  • Dimensione:  30 x 30 x 250 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x50mm
Pillar 30x30x50mm
N° : FX-PR30__50
Prix:  181,44 zł
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/50
  • Dimensione:  30 x 30 x 50 mm
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  9 063,36 zł
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP600/600
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
N° : FX-SO16__30
Prix:  82,08 zł
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/30
  • Lunghezza:  30 mm
  • Diametro:  16 mm
En stock - Livraison sous 1 à 2 jours