text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Classroom Training - PC-DMIS Level 1 CAD  - 5 days
ID: TC-015617
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.

  • Class Type:  Classroom Training
  • Start Date:  11/01/2027
  • Città:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015616
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  14/12/2026
  • Città:  Telford
Classroom Training - QUINDOS Level 1 – Basic
ID: TC-016033
Prezzo: 
Descrizione: 

Onsite Training - QUINDOS Level 1 – Basic  - 5 days

Course summary/agenda:
The QUINDOS level 1 - The basic course is designed for first time and experienced CMM users alike in terms of basic QUINDOS knowledge. The course begins with the basics of CMMs and an introduction to the QUINDOS software and machine configuration. The week progresses with advancing tasks enabling the delegate to build programs for the measurement and evaluation of Geometric Components, whilst learning optimised methods for programming. During the week there will be opportunities to fault find allowing the delegate to competently work when they are back in their workplace. During the course, we assess each delegate to ensure common tasks will be incorporated making the learning outcome more specific to each application.

  • Class Type:  Classroom Training
  • Start Date:  26/10/2026
  • Città:  Telford
Classroom Training - QUINDOS Level 1 – Basic
ID: TC-016032
Prezzo: 
Descrizione: 

Onsite Training - QUINDOS Level 1 – Basic  - 5 days

Course summary/agenda:
The QUINDOS level 1 - The basic course is designed for first time and experienced CMM users alike in terms of basic QUINDOS knowledge. The course begins with the basics of CMMs and an introduction to the QUINDOS software and machine configuration. The week progresses with advancing tasks enabling the delegate to build programs for the measurement and evaluation of Geometric Components, whilst learning optimised methods for programming. During the week there will be opportunities to fault find allowing the delegate to competently work when they are back in their workplace. During the course, we assess each delegate to ensure common tasks will be incorporated making the learning outcome more specific to each application.

  • Class Type:  Classroom Training
  • Start Date:  23/11/2026
  • Città:  Telford
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Prezzo:  2.150,00 zł
Descrizione:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Codice prodotto:  CALIBRATION SET 18
  • Montaggio:  Montaggio con scanalatura a T
  • Diametro sfera:  30
Disponibile - Spedizione in 1-2 Giorni
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Prezzo:  2.103,00 zł
Descrizione:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Codice prodotto:  CALIBRATION SET 14
  • Montaggio:  Montaggio con scanalatura a T
  • Diametro sfera:  30
Disponibile - Spedizione in 1-2 Giorni
AID15 for Inner Diameters
ID: 577357
Prezzo:  2.245,00 zł
Descrizione:  AID15 for Inner Diameters
  • Codice prodotto:  577357
  • Dimensione del riflettore:  1.5"
  • Filetto:  M8
Tempi di consegna 10-15 Giorni
MCA44 Automation Sensor Cable, 10 m
ID: 576196
Prezzo:  2.756,00 zł
Descrizione:  MCA44 Automation Sensor Cable, 10 m
  • Codice prodotto:  576196
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
  • Lunghezza:  10
Tempi di consegna 10-15 Giorni
Absolute Arm Raiser (250 mm) with Mounting Ring 3.5"
ID: NCA7-5-52794
Prezzo:  9.482,00 zł
Descrizione: 

Multi-purpose 250 mm stand, suitable for Absolute Arm tube stations as well as other high-accuracy arm applications. For use with all Absolute Arm models, except Absolute Arm model RA8v3.

  • Codice prodotto:  NCA7-5-52794
  • Dimensione consigliata del braccio:  1,5 - 4,5
  • Compatibilità:  Absolute Arm RA7, Absolute Arm RA8
Consegna > 25 giorni
T-Mac Inspect TMC30-I Cable, 30 m
ID: 576510
Prezzo:  5.710,00 zł
Descrizione:  T-Mac Inspect TMC30-I Cable, 30 m
  • Codice prodotto:  576510
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
  • Lunghezza:  30
Tempi di consegna 10-15 Giorni
Red-Ring Reflector (RRR) 7/8", 5-Pack
ID: 576313
Prezzo:  38.537,00 zł
Descrizione:  Red-Ring Reflector (RRR) 7/8", 5-pack
  • Codice prodotto:  576313
  • Dimensione:  7/8"
  • Raggio (mm):  11.1125
Tempi di consegna 10-15 Giorni
GEB243 Battery int Li-Ion 14.4 V / 6400 mAh
ID: 971703
Prezzo:  1.742,00 zł
Descrizione: 

Rechargable internal Li-Ion battery Li-Ion 14.4 V / 6400 mAh

  • Codice prodotto:  971703
  • Compatibilità del sistema:  TM6100A Motorized Industrial Theodolite
Tempi di consegna 10-15 Giorni
Classroom Training - PC-DMIS Level 1 CAD  - 5 days
ID: TC-015611
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.

  • Class Type:  Classroom Training
  • Start Date:  12/10/2026
  • Città:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015601
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  20/07/2026
  • Città:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015610
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  21/09/2026
  • Città:  Telford
Classroom Training - PC-DMIS Level 1 CAD  - 5 days
ID: TC-016186
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.

  • Class Type:  Classroom Training
  • Start Date:  27/07/2026
  • Città:  Telford
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-W
Prezzo:  1.634,00 zł
Descrizione: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

  • Codice prodotto:  D28-HSK100A-W
  • Interfaccia:  D28
  • Forma:  A
Disponibile - Spedizione in 1-2 Giorni
Taper Shank SK40 / CAT40
ID: D28-SK__CAT40-A__B
Prezzo:  963,00 zł
Descrizione: 

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

  • Codice prodotto:  D28-SK/CAT40-A/B
  • Interfaccia:  D28
Disponibile - Spedizione in 1-2 Giorni
Modular Adapter D20/D28
ID: D20-MO-B
Prezzo:  387,00 zł
Descrizione: 

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

  • Codice prodotto:  D20-MO-B
  • Interfaccia:  D20
Disponibile - Spedizione in 1-2 Giorni
Hollow Taper Shank HSK32 Form A
ID: D28-HSK32A-B
Prezzo:  3.182,00 zł
Descrizione: 

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

  • Codice prodotto:  D28-HSK32A-B
  • Interfaccia:  D28
  • Forma:  A
Disponibile - Spedizione in 1-2 Giorni