text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tiempo de entrega 10-15 días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  1.220,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  1.220,00 €
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Precio:  1.490,00 €
Descripción rápida:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  1.490,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio esterno (A):  1 - 150mm
  • Campo di serraggio interno (I):  34 - 174mm
  • Materiale:  Acciaio inossidabile
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Precio:  1.420,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio esterno (A):  1 - 150mm
  • Campo di serraggio interno (I):  34 - 174mm
  • Materiale:  Acciaio inossidabile
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  1.140,00 €
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Precio:  1.490,00 €
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Precio:  €1,140.00
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
Tiempo de entrega 10-15 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  €33.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
En Stock - Envío 1-2 Días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  €50.00
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
En Stock - Envío 1-2 Días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  €10.00
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Lunghezza:  20 mm
  • Diametro:  16 mm
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  €84.00
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  €33.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  €26.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
En Stock - Envío 1-2 Días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  €33.00
Descripción rápida:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  €60.00
Descripción rápida:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  €1,200.00
Descripción rápida:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-STARTER/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
En Stock - Envío 1-2 Días