text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue

Catalogue

Probe with fixed ball (SS-12.7-C-85)
Probe with fixed ball (SS-12.7-C-85)
N° : H00000383-07
Prix:  536,00 CHF
Vue d'ensemble sommaire:  85 mm carbon probe with glue-mounted stainless steel ball Ø12.7 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00000383-07
  • Diametro punta:  12.7
  • Lunghezza:  85
Livraison > 25 jours
Probe with fixed ball (SS-9.5-C-50)
Probe with fixed ball (SS-9.5-C-50)
N° : H00000383-01
Prix:  536,00 CHF
Vue d'ensemble sommaire:  50 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00000383-01
  • Diametro punta:  9.5
  • Lunghezza:  50
Livraison > 25 jours
SWIFT-CHECK
SWIFT-CHECK
N° : GB0096-2001
Prix:  5.756,00 CHF
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Codice prodotto:  GB0096-2001
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Livraison > 25 jours
SWIFT-SET
SWIFT-SET
N° : GB0122-1000
Prix:  8.550,00 CHF
Vue d'ensemble sommaire: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Codice prodotto:  GB0122-1000
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Livraison > 25 jours
Jogbox (NJB) Kit with cable, 4 m
Jogbox (NJB) Kit with cable, 4 m
N° : G59682600
Prix:  1.478,00 CHF
Vue d'ensemble sommaire: 

Jogbox (NJB) Kit including cradle and cable (4 m).
  • Codice prodotto:  G59682600
Livraison > 25 jours
Jogbox (NJB) Kit with cable, 6 m
Jogbox (NJB) Kit with cable, 6 m
N° : G59682700
Prix:  1.494,00 CHF
Vue d'ensemble sommaire: 

Jogbox (NJB) Kit including cradle and cable (6 m).
  • Codice prodotto:  G59682700
En stock - Livraison sous 1 à 2 jours
Jogbox (NJB) Kit with cable, 15 m
Jogbox (NJB) Kit with cable, 15 m
N° : G59682800
Prix:  1.698,00 CHF
Vue d'ensemble sommaire: 

Jogbox (NJB) Kit including cradle and cable (15 m).
  • Codice prodotto:  G59682800
Livraison sous 10 à 15 jours
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
N° : G39031501
Prix:  1.276,00 CHF
Vue d'ensemble sommaire: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 25 mm) and a robust stand that allows precise positioning of the sphere at 0°, 45° and 90°. With M8 mounting for secure machine fixing.
  • Codice prodotto:  G39031501
  • Materiale sfera:  Ceramica
  • Diametro sfera (D):  25
Livraison sous 10 à 15 jours
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
N° : G39032100
Prix:  796,00 CHF
Vue d'ensemble sommaire: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made of ceramic and a stand made of high-strength steel (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.
  • Codice prodotto:  G39032100
  • Materiale sfera:  Ceramica
  • Diametro sfera:  25
Livraison sous 10 à 15 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  1.004,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  33,00 CHF
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  47,00 CHF
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
En stock - Livraison sous 1 à 2 jours
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
N° : FV-GUIDE480
Prix:  254,00 £
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  9,00 £
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  76,00 £
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
N° : FX-CTMED
Prix:  30,00 £
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  30,00 £
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
N° : FV-LATSML
Prix:  35,00 £
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
N° : FX-LATMED
Prix:  53,00 £
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FX-LATMED
  • Lunghezza:  20 mm
  • Diametro:  16 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
N° : FX-BRONZE__KIT
Prix:  965,00 £
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-BRONZE/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
En stock - Livraison sous 1 à 2 jours