text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Standoff Support (M8)
ID: FX-SO__SUPP
Prezzo:  22,00 €
Descrizione:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FX-SO/SUPP
  • Filetto:  M8
  • Diametro:  15 mm
  • Lunghezza:  10 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  62,00 €
Descrizione: 

The adjustable standoff provides maximum flexibility when raising workpieces and positioning other Swift-Fix components.

  • Codice prodotto:  FX-HEIGHT
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  50 mm
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.955,00 €
Descrizione: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Codice prodotto:  FX-BP400/600
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Centering Pin
ID: FV-MALE
Prezzo:  24,00 €
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Codice prodotto:  FV-MALE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prezzo:  6,00 €
Descrizione: 

Retaining screws securely fasten base plates to the machine table and enable precise, repeatable positioning of multiple base plates side by side.

  • Codice prodotto:  FX-BPRTR
  • Filetto:  M8
Tempi di consegna 10-15 Giorni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.254,00 €
Descrizione: 

The Swift-Fix Starter Kit contains the essential components required for fixture applications on multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Codice prodotto:  FV-STARTERKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/15
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  15 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prezzo:  18,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/30
  • Filetto:  M8
  • Diametro:  20 mm
  • Lunghezza:  30 mm
Tempi di consegna 10-15 Giorni
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  19,00 €
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Codice prodotto:  FX-CAPM8/16
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Universal Joint
ID: FX-UNI__JOINT
Prezzo:  95,00 €
Descrizione:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Codice prodotto:  FX-UNI/JOINT
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2.530,00 €
Descrizione: 

The Swift-Fix Full Kit provides all components required to meet the fixturing needs of multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Codice prodotto:  FV-FULLKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Vee Locator (M8)
ID: FX-VEE
Prezzo:  77,00 €
Descrizione: 

The Vee locator can be mounted directly on the base plate or on top of standoffs for precise positioning of large workpieces.

  • Codice prodotto:  FX-VEE
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Kinematic Support Kit
ID: FX-KINKIT
Prezzo:  262,00 €
Descrizione:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Codice prodotto:  FX-KINKIT
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  22,00 €
Descrizione: 

The magnetic standoff provides reliable and repeatable holding and raising of magnetic workpieces without restricting access to relevant measurement areas.

  • Codice prodotto:  FX-SO/MAG
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  49,00 €
Descrizione: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.

  • Codice prodotto:  FX-PR30PLATE
  • Dimensione:  130 x 30 mm
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  605,00 €
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200C
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  22,00 €
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Codice prodotto:  FV-ANGSLIDER
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  40,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/100
  • Dimensione:  30 x 30 x 100 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  49,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Codice prodotto:  FX-PR30/250
  • Dimensione:  30 x 30 x 250 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  38,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/50
  • Dimensione:  30 x 30 x 50 mm
Disponibile - Spedizione in 1-2 Giorni