text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  2.064,00 zł
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  2.408,00 zł
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tempi di consegna 10-15 Giorni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  3.999,00 zł
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  142,00 zł
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  202,00 zł
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  77,00 zł
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  361,00 zł
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  142,00 zł
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  3.354,00 zł
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  112,00 zł
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  142,00 zł
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prezzo:  232,00 zł
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FX-LATMED
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prezzo:  4.343,00 zł
Descrizione:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-BRONZE/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  185,00 zł
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/150
  • Dimensione:  30 x 30 x 150 mm
Disponibile - Spedizione in 1-2 Giorni
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  22.919,00 zł
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Codice prodotto:  GB0096-2001
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Consegna > 25 giorni
Kinematic Support Kit
ID: FX-KINKIT
Prezzo:  1.127,00 zł
Descrizione:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Codice prodotto:  FX-KINKIT
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  95,00 zł
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Codice prodotto:  FX-SO/MAG
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M8)
ID: FX-CONE
Prezzo:  95,00 zł
Descrizione:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Codice prodotto:  FX-CONE
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  211,00 zł
Descrizione:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Codice prodotto:  FX-PR30PLATE
  • Dimensione:  130 x 30 mm
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  6.536,00 zł
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP500/500
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni