text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla
  1. Domů
  2. Katalog
  3. SMS
  4. Upínání

Upínání

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 CHF
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Odeslání do 10-15 dnů
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 CHF
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Odeslání do 10-15 dnů
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  50,00 CHF
Rychlý přehled:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
Skladem - Odeslání do 1-2 dnů
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Cena:  10,00 CHF
Rychlý přehled:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
Skladem - Odeslání do 1-2 dnů
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  18,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Skladem - Odeslání do 1-2 dnů
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  84,00 CHF
Rychlý přehled:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Skladem - Odeslání do 1-2 dnů
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  26,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
Skladem - Odeslání do 1-2 dnů
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  33,00 CHF
Rychlý přehled:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
Skladem - Odeslání do 1-2 dnů
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Cena:  60,00 CHF
Rychlý přehled:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
Skladem - Odeslání do 1-2 dnů
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  1.200,00 CHF
Rychlý přehled:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-STARTER/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Skladem - Odeslání do 1-2 dnů
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  47,00 CHF
Rychlý přehled:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Skladem - Odeslání do 1-2 dnů
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  262,00 CHF
Rychlý přehled:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Skladem - Odeslání do 1-2 dnů
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  22,00 CHF
Rychlý přehled:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Skladem - Odeslání do 1-2 dnů
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  €38.00
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
Skladem - Odeslání do 1-2 dnů
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Cena:  €30.00
Rychlý přehled:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/100
  • Lunghezza:  100 mm
  • Diametro:  20 mm
Skladem - Odeslání do 1-2 dnů
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  €44.00
Rychlý přehled:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Skladem - Odeslání do 1-2 dnů
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  €1,151.00
Rychlý přehled:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-BRONZE/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  €11.00
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
Skladem - Odeslání do 1-2 dnů
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  €21.00
Rychlý přehled:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
Skladem - Odeslání do 1-2 dnů