text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
Czas dostawy 10-15 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  1.220,00 €
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Cena:  1.220,00 €
Szybki Podgląd:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Cena:  1.490,00 €
Szybki Podgląd:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Cena:  1.490,00 €
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Cena:  1.420,00 €
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Czas dostawy 10-15 dni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Cena:  1.140,00 €
Szybki Podgląd:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Czas dostawy 10-15 dni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Cena:  zł6,407.00
Szybki Podgląd:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Cena:  zł4,902.00
Szybki Podgląd: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
Czas dostawy 10-15 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  zł3,999.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  zł142.00
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł202.00
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  zł1,127.00
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł43.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  zł95.00
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  zł3,354.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  zł168.00
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  zł43.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  zł77.00
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni