Macchina Utensile

Universal connecting cable to transmit measuring signals from Hexagon receivers to Mitsubishi controls. Shielded cable with 3M 10120-3000PE plug and open wires. Length: 6 m / 19.7'

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X12. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 4 m / 13.1'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 5 m / 16.4'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 1 m / 3.3'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 3 m / 9.8'

Adapter cable with 90°-plug M12/F08 and M12/M08 plug. Length: 0.3 m / 1'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 5 m / 16.4'

Horizontal mounting holder for installing the radio-wave receiver RWR95.40 inside the machining area.

Rotating / pivoting holder for the m&h infrared receiver IRR91.42. It enables flexible positioning within the machine tool's machining area and ensures optimal signal transmission and reliable communication.

Quick-release Clamping Ring

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 76 mm / 2.99"

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection. Adapter Ø: 50 mm / 1.97"

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.