text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  480,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  560,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tempi di consegna 10-15 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1.220,00 €
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1.220,00 €
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1.490,00 €
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prezzo:  1.140,00 €
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prezzo:  1.490,00 €
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prezzo:  1.140,00 €
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
Tempi di consegna 10-15 Giorni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  930,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
ID: FV-FEMALE
Prezzo:  33,00 €
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  262,00 €
Descrizione:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  22,00 €
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  780,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  39,00 €
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  84,00 €
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prezzo:  1.060,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/400
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.810,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/600
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni