text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  547,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  638,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Czas dostawy 10-15 dni
Spring Clamp (M8)
ID: FX-SPRING
Cena:  57,00 €
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
ID: FX-THUMB
Cena:  11,00 €
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  21,00 €
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Lunghezza:  20 mm
  • Diametro:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  96,00 €
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  zł112.00
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  zł142.00
Szybki Podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Cena:  zł258.00
Szybki Podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Codice prodotto:  FX-SUB45/120
  • Dimensione:  120 x 45 x 12 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  zł5,160.00
Szybki Podgląd:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-STARTER/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł202.00
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  zł1,127.00
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł43.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  zł95.00
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  zł142.00
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Cena:  zł112.00
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO20/100
  • Lunghezza:  100 mm
  • Diametro:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  zł168.00
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  zł4,343.00
Szybki Podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-BRONZE/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  zł43.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
ID: FV-SOSUP
Cena:  zł77.00
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni