text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  £436.00
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0019
  • Kompatibilitás:  HP-S-X3 Tapintótárak
  • Átmérő:  40mm
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  £509.00
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0008
  • Kompatibilitás:  HP-S-X1 Tapintótárak
  • Átmérő:  60mm
A szállítási idő 10-15 nap
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  £845.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  £30.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTSML
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  £43.00
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Alkatrészszám:  FV-VEETWIN
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  £16.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/20
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  £76.00
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Alkatrészszám:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  £30.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTMED
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x300x12mm (M8)
Azonosító: FX-BP300__300
Ár:  £709.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/300
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 100 mm)
Azonosító: FX-SO16__100
Ár:  £24.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/100
  • Hosszúság:  100 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  £30.00
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Alkatrészszám:  FX-M8SPRGNUT
Raktáron - Kiszállítás 1-2 napon belül
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Azonosító: FX-LATMED
Ár:  £49.00
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Alkatrészszám:  FX-LATMED
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Bronze Kit
Azonosító: FX-BRONZE__KIT
Ár:  £918.00
Gyors áttekintés:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Alkatrészszám:  FX-BRONZE/KIT
  • Menet:  M8
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x150mm
Azonosító: FX-PR30__150
Ár:  £39.00
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Alkatrészszám:  FX-PR30/150
  • Méret:  30 x 30 x 150 mm
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  £4,845.00
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Alkatrészszám:  GB0096-2001
  • Koordináta-mérőgép kompatibilitás:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Szoftver-kompatibilitás:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Futamidő:  Hossz ellenőrzés: 20 perc, Gyűrű ellenőrzés: 5 perc, Gömb ellenőrzés: 5 perc, Csukló / mérőfej ellenőrzés: 10 perc
  • Méretek:  Length Bar Length = 300 mm, Gyűrűetalon átmérője = 25 mm, Gömb átmérő = 25 mm
Szállítási > 25 nap
Kinematic Support Kit
Azonosító: FX-KINKIT
Ár:  £238.00
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Alkatrészszám:  FX-KINKIT
Raktáron - Kiszállítás 1-2 napon belül
Standoff Magnet  (D = 16 mm / L = 20 mm)
Azonosító: FX-SO__MAG
Ár:  £20.00
Gyors áttekintés:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Alkatrészszám:  FX-SO/MAG
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M8)
Azonosító: FX-CONE
Ár:  £20.00
Gyors áttekintés:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Alkatrészszám:  FX-CONE
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Pillar Base Plate
Azonosító: FX-PR30PLATE
Ár:  £45.00
Gyors áttekintés:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Alkatrészszám:  FX-PR30PLATE
  • Méret:  130 x 30 mm
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 500x500x12mm (M8)
Azonosító: FX-BP500__500
Ár:  £1,382.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP500/500
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül