text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  480,00 CHF
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0019
  • Kompatibilitás:  HP-S-X3 Tapintótárak
  • Átmérő:  40
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  560,00 CHF
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0008
  • Kompatibilitás:  HP-S-X1 Tapintótárak
  • Átmérő:  60
A szállítási idő 10-15 nap
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  1 004,00 CHF
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
Price:  33,00 CHF
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTSML
  • Menet:  Menet nélküli
In Stock
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Price:  47,00 CHF
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Alkatrészszám:  FV-VEETWIN
In Stock
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
Price:  18,00 CHF
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/20
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
In Stock
Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  84,00 CHF
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Alkatrészszám:  FX-PR30HINGE
In Stock
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  33,00 CHF
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTMED
  • Menet:  Menet nélküli
In Stock
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
SKU: FX-SUB45__120
Price:  60,00 CHF
Quick overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Alkatrészszám:  FX-SUB45/120
  • Méret:  120 x 45 x 12 mm
In Stock
Support Stop
Support Stop
SKU: FX-SUP__STOP
Price:  87,00 CHF
Quick overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Alkatrészszám:  FX-SUP/STOP
  • Menet:  M8
In Stock
Swift-Fix Tool Kit
Swift-Fix Tool Kit
SKU: FX-TOOLS
Price:  27,00 CHF
Quick overview:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Alkatrészszám:  FX-TOOLS
In Stock
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
SKU: FX-SO20__30
Price:  18,00 CHF
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO20/30
  • Hosszúság:  30 mm
  • Átmérő:  20 mm
In Stock
Universal Joint
Universal Joint
SKU: FX-UNI__JOINT
Price:  95,00 CHF
Quick overview:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Alkatrészszám:  FX-UNI/JOINT
  • Menet:  M8
In Stock
Vee Locator
Vee Locator
SKU: FX-VEE
Price:  77,00 CHF
Quick overview:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Alkatrészszám:  FX-VEE
  • Menet:  M8
In Stock
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
SKU: FX-SO20__50
Price:  19,00 CHF
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO20/50
  • Hosszúság:  50 mm
  • Átmérő:  20 mm
In Stock
Toggle Clamp
Toggle Clamp
SKU: FX-TOG
Price:  139,00 CHF
Quick overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Alkatrészszám:  FX-TOG
  • Menet:  M8
In Stock
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
SKU: FX-BPRTR
Price:  6,00 CHF
Quick overview:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Alkatrészszám:  FX-BPRTR
  • Menet:  M8
In Stock
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
SKU: FV-STARTERKIT
Price:  1 254,00 CHF
Quick overview:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Alkatrészszám:  FV-STARTERKIT
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros koordináta-mérőgép
In Stock
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
SKU: FX-CAPM8__16
Price:  19,00 CHF
Quick overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Alkatrészszám:  FX-CAPM8/16
  • Menet:  M8
In Stock
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
SKU: FX-CAPM8__20
Price:  19,00 CHF
Quick overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Alkatrészszám:  FX-CAPM8/20
  • Menet:  M8
In Stock