text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  €480.00
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0019
  • Kompatibilitás:  HP-S-X3 Tapintótárak
  • Átmérő:  40mm
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  €560.00
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0008
  • Kompatibilitás:  HP-S-X1 Tapintótárak
  • Átmérő:  60mm
A szállítási idő 10-15 nap
Spring Clamp (M8)
Azonosító: FX-SPRING
Ár:  €50.00
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Alkatrészszám:  FX-SPRING
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  €10.00
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Alkatrészszám:  FX-THUMB
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  €18.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/20
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  €84.00
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Alkatrészszám:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 100 mm)
Azonosító: FX-SO16__100
Ár:  €26.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/100
  • Hosszúság:  100 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  €33.00
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Alkatrészszám:  FX-M8SPRGNUT
Raktáron - Kiszállítás 1-2 napon belül
Pillar Top Plate  (10 x M8)
Azonosító: FX-SUB45__120
Ár:  €60.00
Gyors áttekintés:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Alkatrészszám:  FX-SUB45/120
  • Méret:  120 x 45 x 12 mm
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Starter Kit
Azonosító: FX-STARTER__KIT
Ár:  €1,200.00
Gyors áttekintés:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Alkatrészszám:  FX-STARTER/KIT
  • Menet:  M8
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Support Stop
Azonosító: FX-SUP__STOP
Ár:  €87.00
Gyors áttekintés:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Alkatrészszám:  FX-SUP/STOP
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  €930.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  €5,330.00
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Alkatrészszám:  GB0096-2001
  • Koordináta-mérőgép kompatibilitás:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Szoftver-kompatibilitás:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Futamidő:  Hossz ellenőrzés: 20 perc, Gyűrű ellenőrzés: 5 perc, Gömb ellenőrzés: 5 perc, Csukló / mérőfej ellenőrzés: 10 perc
  • Méretek:  Length Bar Length = 300 mm, Gyűrűetalon átmérője = 25 mm, Gömb átmérő = 25 mm
Szállítási > 25 nap
SWIFT-SET
Azonosító: GB0122-1000
Ár:  €8,550.00
Gyors áttekintés: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Alkatrészszám:  GB0122-1000
  • Kompatibilitás:  HP-S-X5 Tapintótárak, HP-S-X3 Tapintótárak (adapterrel), HP-S-X1 Stylus Clampings (with Adapter)
  • Tengelykörüli elfordulás:  0° - 360°
  • Szögelfordulás:  0°- 90°
Szállítási > 25 nap
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
Azonosító: FC-125SS3
Ár:  €1,220.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125SS3
  • Befogó tokmány külső átmérője (D1):  125mm
  • Külső befogási tartomány (A):  1 - 126mm
  • Belső befogási tartomány (I):  32 - 122mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
Azonosító: FC-125AL6
Ár:  €1,220.00
Gyors áttekintés:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6
  • Befogó tokmány külső átmérője (D1):  125mm
  • Befogási tartomány:  5 - 156mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
Azonosító: FC-160AL6
Ár:  €1,490.00
Gyors áttekintés:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160AL6
  • Befogó tokmány külső átmérője (D1):  160mm
  • Befogási tartomány:  5 - 196mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
Azonosító: FC-240AL3
Ár:  €3,440.00
Gyors áttekintés:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-240AL3
  • Befogó tokmány külső átmérője (D1):  240mm
  • Külső befogási tartomány (A):  1 - 288mm
  • Belső befogási tartomány (I):  35 - 295mm
  • Rögzítés:  M8
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
Azonosító: FC-160SS3
Ár:  €1,490.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160SS3
  • Befogó tokmány külső átmérője (D1):  160mm
  • Külső befogási tartomány (A):  1 - 150mm
  • Belső befogási tartomány (I):  34 - 174mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
Azonosító: FC-70SS3
Ár:  €940.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-70SS3
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül