text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Vee Locator
Azonosító: FV-FEMALE
Ár:  33,00 €
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Alkatrészszám:  FV-FEMALE
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Azonosító: FV-GUIDE480
Ár:  279,00 €
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Alkatrészszám:  FV-GUIDE480
  • Lemez kompatibilitás:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Hosszúság:  20 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
Azonosító: FC-125AL6
Ár:  1 318,00 €
Gyors áttekintés:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  1 004,00 €
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  33,00 €
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTSML
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  47,00 €
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Alkatrészszám:  FV-VEETWIN
Raktáron - Kiszállítás 1-2 napon belül
Spring Clamp (M8)
Azonosító: FX-SPRING
Ár:  50,00 €
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Alkatrészszám:  FX-SPRING
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  18,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/20
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  84,00 €
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Alkatrészszám:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  33,00 €
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTMED
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
Azonosító: FC-160SS3-NF
Ár:  1 420,00 €
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160SS3-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Külső befogási tartomány (A):  1 - 150
  • Belső befogási tartomány (I):  34 - 174
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
Azonosító: FC-125AL6-NF
Ár:  1 140,00 €
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Rögzítés (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
Azonosító: FC-160AL6-NF
Ár:  1 490,00 €
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160AL6-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Befogási tartomány:  5 - 196
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
Azonosító: FC-240AL3-NF
Ár:  3 300,00 €
Gyors áttekintés:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-240AL3-NF
  • Befogó tokmány külső átmérője (D1):  240
  • Külső befogási tartomány (A):  1 - 288
  • Belső befogási tartomány (I):  35 - 295
  • Rögzítés (G):  M8
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
Azonosító: FC-125SS3-NF
Ár:  1 140,00 €
Gyors áttekintés: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Alkatrészszám:  FC-125SS3-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Külső befogási tartomány (A):  1 - 126
  • Belső befogási tartomány (I):  32 - 122
  • Rögzítés (G):  M5
A szállítási idő 10-15 nap
Cap Screw Set M8 (L = 16 mm)
Azonosító: FX-CAPM8__16
Ár:  19,00 €
Gyors áttekintés:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Alkatrészszám:  FX-CAPM8/16
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Cap Screw Set M8 (L = 20 mm)
Azonosító: FX-CAPM8__20
Ár:  19,00 €
Gyors áttekintés:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Alkatrészszám:  FX-CAPM8/20
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Gold Kit
Azonosító: FX-GOLD__KIT
Ár:  2 754,00 €
Gyors áttekintés:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Alkatrészszám:  FX-GOLD/KIT
  • Menet:  M8
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Support Kit
Azonosító: FX-KINKIT
Ár:  262,00 €
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Alkatrészszám:  FX-KINKIT
Raktáron - Kiszállítás 1-2 napon belül