text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  CHF10.00
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Alkatrészszám:  FX-THUMB
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  CHF10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Hosszúság:  20 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Baseplate Retaining Screw (M8)
Azonosító: FX-BPRTR
Ár:  CHF6.00
Gyors áttekintés:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Alkatrészszám:  FX-BPRTR
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 15 mm)
Azonosító: FV-SO8__15
Ár:  CHF10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/15
  • Hosszúság:  15 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M4)
Azonosító: FV-CONE
Ár:  CHF15.00
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Alkatrészszám:  FV-CONE
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Azonosító: FV-BP200__200P
Ár:  CHF560.00
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Alkatrészszám:  FV-BP200/200P
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 20 mm / L = 100 mm)
Azonosító: FX-SO20__100
Ár:  CHF26.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO20/100
  • Hosszúság:  100 mm
  • Átmérő:  20 mm
Raktáron - Kiszállítás 1-2 napon belül
Pillar Kit
Azonosító: FX-PILLAR__KIT
Ár:  CHF1,020.00
Gyors áttekintés:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Alkatrészszám:  FX-PILLAR/KIT
Raktáron - Kiszállítás 1-2 napon belül
Standoff Support (M8)
Azonosító: FX-SO__SUPP
Ár:  CHF22.00
Gyors áttekintés:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Alkatrészszám:  FX-SO/SUPP
  • Hosszúság:  10 mm
  • Átmérő:  15 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff Adjustable (M8)
Azonosító: FX-HEIGHT
Ár:  CHF62.00
Gyors áttekintés:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Alkatrészszám:  FX-HEIGHT
  • Hosszúság:  50 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 400x600x12mm (M8)
Azonosító: FX-BP400__600
Ár:  CHF1,810.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP400/600
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Centering Pin
Azonosító: FV-MALE
Ár:  CHF24.00
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Alkatrészszám:  FV-MALE
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M8)
Azonosító: FX-CONE
Ár:  CHF22.00
Gyors áttekintés:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Alkatrészszám:  FX-CONE
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Azonosító: FX-SO__PIN
Ár:  CHF22.00
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Alkatrészszám:  FX-SO/PIN
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Slider Block (M8)
Azonosító: FX-SLIDER
Ár:  CHF26.00
Gyors áttekintés:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Alkatrészszám:  FX-SLIDER
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 50 mm)
Azonosító: FX-SO16__50
Ár:  CHF19.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/50
  • Hosszúság:  50 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
Azonosító: FC-125AL6-NF
Ár:  CHF1,140.00
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Rögzítés (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
Azonosító: FC-160AL6-NF
Ár:  CHF1,490.00
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160AL6-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Befogási tartomány:  5 - 196
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
3-Jaw 125 Inside Clamping Set (Stainless Steel)
Azonosító: FC-JS-125SS3-I
Ár:  CHF418.00
Gyors áttekintés: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Alkatrészszám:  FC-JS-125SS3-I
A szállítási idő 10-15 nap
3-Jaw 160 Inside Clamping Set (Stainless Steel)
Azonosító: FC-JS-160SS3-I
Ár:  CHF474.00
Gyors áttekintés: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.

  • Alkatrészszám:  FC-JS-160SS3-I
A szállítási idő 10-15 nap