text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  2 064,00 zł
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0019
  • Kompatibilitás:  HP-S-X3 Tapintótárak
  • Átmérő:  40
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  2 408,00 zł
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0008
  • Kompatibilitás:  HP-S-X1 Tapintótárak
  • Átmérő:  60
A szállítási idő 10-15 nap
Vee Locator
Azonosító: FV-FEMALE
Ár:  142,00 zł
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Alkatrészszám:  FV-FEMALE
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Azonosító: FV-GUIDE480
Ár:  1 200,00 zł
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Alkatrészszám:  FV-GUIDE480
  • Lemez kompatibilitás:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  43,00 zł
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Hosszúság:  20 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  24 751,00 zł
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Alkatrészszám:  GB0096-2001
  • Koordináta-mérőgép kompatibilitás:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Szoftver-kompatibilitás:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Futamidő:  Hossz ellenőrzés: 20 perc, Gyűrű ellenőrzés: 5 perc, Gömb ellenőrzés: 5 perc, Csukló / mérőfej ellenőrzés: 10 perc
  • Méretek:  Length Bar Length = 300 mm, Gyűrűetalon átmérője = 25 mm, Gömb átmérő = 25 mm
Szállítási > 25 nap
SWIFT-SET
Azonosító: GB0122-1000
Ár:  36 765,00 zł
Gyors áttekintés: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Alkatrészszám:  GB0122-1000
  • Kompatibilitás:  HP-S-X5 Tapintótárak, HP-S-X3 Tapintótárak (adapterrel), HP-S-X1 Stylus Clampings (with Adapter)
  • Tengelykörüli elfordulás:  0° - 360°
  • Szögelfordulás:  0°- 90°
Szállítási > 25 nap
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
Azonosító: FC-160SS3-NF
Ár:  6 106,00 zł
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160SS3-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Külső befogási tartomány (A):  1 - 150
  • Belső befogási tartomány (I):  34 - 174
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
Azonosító: FC-125AL6-NF
Ár:  4 902,00 zł
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Rögzítés (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
Azonosító: FC-160AL6-NF
Ár:  6 407,00 zł
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160AL6-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Befogási tartomány:  5 - 196
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
Azonosító: FC-240AL3-NF
Ár:  14 190,00 zł
Gyors áttekintés:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-240AL3-NF
  • Befogó tokmány külső átmérője (D1):  240
  • Külső befogási tartomány (A):  1 - 288
  • Belső befogási tartomány (I):  35 - 295
  • Rögzítés (G):  M8
A szállítási idő 10-15 nap
Fixture Baseplate 400x400x12mm (M8)
Azonosító: FX-BP400__400
Ár:  4 924,00 zł
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP400/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 20 mm / L = 20 mm)
Azonosító: FX-SO20__20
Ár:  82,00 zł
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO20/20
  • Hosszúság:  20 mm
  • Átmérő:  20 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff Adjustable (M8)
Azonosító: FX-HEIGHT
Ár:  267,00 zł
Gyors áttekintés:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Alkatrészszám:  FX-HEIGHT
  • Hosszúság:  50 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw 125 Inside Clamping Set (Stainless Steel)
Azonosító: FC-JS-125SS3-I
Ár:  1 797,00 zł
Gyors áttekintés: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Alkatrészszám:  FC-JS-125SS3-I
A szállítási idő 10-15 nap
3-Jaw 160 Inside Clamping Set (Stainless Steel)
Azonosító: FC-JS-160SS3-I
Ár:  2 038,00 zł
Gyors áttekintés: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.

  • Alkatrészszám:  FC-JS-160SS3-I
A szállítási idő 10-15 nap
3-Jaw 70 Outside Clamping Set (Stainless Steel)
Azonosító: FC-JS-70SS3-E
Ár:  1 565,00 zł
Gyors áttekintés: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.

  • Alkatrészszám:  FC-JS-70SS3-E
A szállítási idő 10-15 nap
3-Jaw 125 Outside Clamping Set (Stainless Steel)
Azonosító: FC-JS-125SS3-E
Ár:  1 797,00 zł
Gyors áttekintés: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Alkatrészszám:  FC-JS-125SS3-E
A szállítási idő 10-15 nap
3-Jaw 160 Outside Clamping Set (Stainless Steel)
Azonosító: FC-JS-160SS3-E
Ár:  2 038,00 zł
Gyors áttekintés: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.

  • Alkatrészszám:  FC-JS-160SS3-E
A szállítási idő 10-15 nap
6-Jaw 125 Inside/Outside Clamping Set (AL)
Azonosító: FC-JS-125AL6-IE
Ár:  3 139,00 zł
Gyors áttekintés: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.

  • Alkatrészszám:  FC-JS-125AL6-IE
A szállítási idő 10-15 nap