text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catalogue

Catalogue

Tool Box 35.20-TB
Tool Box 35.20-TB
Azonosító: 35.20-TB
Ár:  CHF57.00
Gyors áttekintés:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Alkatrészszám:  35.20-TB
  • Kompatibilitás:  TS35.20
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
Azonosító: CALIBRATION SET 18
Ár:  CHF500.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Alkatrészszám:  CALIBRATION SET 18
  • Felszerelés:  T-hornyos felszerelés
  • Gömb átmérő:  30
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
Azonosító: CALIBRATION SET 14
Ár:  CHF489.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Alkatrészszám:  CALIBRATION SET 14
  • Felszerelés:  T-hornyos felszerelés
  • Gömb átmérő:  30
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
Azonosító: CALIBRATION SET 12
Ár:  CHF489.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Alkatrészszám:  CALIBRATION SET 12
  • Felszerelés:  T-hornyos felszerelés
  • Gömb átmérő:  30
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
Azonosító: 41.00-VE115
Ár:  CHF570.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Alkatrészszám:  41.00-VE115
  • Anyag:  Szénszál
  • Hosszúság:  115
  • Átmérő:  25 mm
  • Külső menet:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 140 mm / 5.51")
Measuring Unit Extension (L = 140 mm / 5.51")
Azonosító: 41.00-VE140
Ár:  CHF474.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.
  • Alkatrészszám:  41.00-VE140
  • Anyag:  Szénszál
  • Hosszúság:  140
  • Átmérő:  25 mm
  • Külső menet:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
Azonosító: 41.00-VE430
Ár:  CHF580.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Alkatrészszám:  41.00-VE430
  • Anyag:  Szénszál
  • Hosszúság:  430
  • Átmérő:  25 mm
  • Külső menet:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
Azonosító: 41.00-VE450
Ár:  CHF580.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Alkatrészszám:  41.00-VE450
  • Anyag:  Szénszál
  • Hosszúság:  450
  • Átmérő:  25 mm
  • Külső menet:  M16x1
A szállítási idő 10-15 nap
M5-Stylus (DS-3-TC-2-L60)
M5-Stylus (DS-3-TC-2-L60)
Azonosító: M00-694-195-000
Ár:  CHF1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 60 mm. For use on coordinate measuring machines (CMM).
  • Alkatrészszám:  M00-694-195-000
  • Menet:  M5
  • Csúcs anyaga:  Gyémánt
  • Csúcsátmérő (D):  3
  • Hosszúság (L):  60
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L35)
M5-Stylus (DS-3-TC-2-L35)
Azonosító: M00-694-192-000
Ár:  CHF1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 35 mm. For use on coordinate measuring machines (CMM).
  • Alkatrészszám:  M00-694-192-000
  • Menet:  M5
  • Csúcs anyaga:  Gyémánt
  • Csúcsátmérő (D):  3
  • Hosszúság (L):  35
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
Azonosító: M00-694-194-000
Ár:  CHF1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Alkatrészszám:  M00-694-194-000
  • Menet:  M5
  • Csúcs anyaga:  Gyémánt
  • Csúcsátmérő (D):  3
  • Hosszúság (L):  30
Szállítási > 25 nap
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
Azonosító: M00-694-190-000
Ár:  CHF1,120.00
Gyors áttekintés:  Straight stylus with Ø2 mm, diamond sphere Ø1 mm, tapered tungsten carbide stem Ø0.8/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
  • Alkatrészszám:  M00-694-190-000
  • Menet:  D2
  • Csúcs anyaga:  Gyémánt
  • Csúcsátmérő (D):  1
  • Hosszúság (L):  22
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L50)
M5-Stylus (DS-3-TC-2-L50)
Azonosító: M00-694-193-000
Ár:  CHF1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 50 mm. For use on coordinate measuring machines (CMM).
  • Alkatrészszám:  M00-694-193-000
  • Menet:  M5
  • Csúcs anyaga:  Gyémánt
  • Csúcsátmérő (D):  3
  • Hosszúság (L):  50
Szállítási > 25 nap
Taper Shank CAT50
Taper Shank CAT50
Azonosító: D28-CAT50-W
Ár:  CHF257.00
Gyors áttekintés: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Alkatrészszám:  D28-CAT50-W
  • Interfész:  D28
A szállítási idő 10-15 nap
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Azonosító: TC-015608
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  17/08/2026
  • Város:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Azonosító: TC-015607
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  10/08/2026
  • Város:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Azonosító: TC-015598
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  13/07/2026
  • Város:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Azonosító: TC-015609
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  14/09/2026
  • Város:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Azonosító: TC-015613
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  09/11/2026
  • Város:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Azonosító: TC-015612
Ár: 
Gyors áttekintés: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Osztálytípus:  Classroom Training
  • Kezdő dátum:  19/10/2026
  • Város:  Telford