text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  €10.00
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Alkatrészszám:  FX-THUMB
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  €10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Hosszúság:  20 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 25 mm)
Azonosító: FV-SO8__25
Ár:  €10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/25
  • Hosszúság:  25 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  €5,330.00
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Alkatrészszám:  GB0096-2001
  • Koordináta-mérőgép kompatibilitás:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Szoftver-kompatibilitás:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Futamidő:  Hossz ellenőrzés: 20 perc, Gyűrű ellenőrzés: 5 perc, Gömb ellenőrzés: 5 perc, Csukló / mérőfej ellenőrzés: 10 perc
  • Méretek:  Length Bar Length = 300 mm, Gyűrűetalon átmérője = 25 mm, Gömb átmérő = 25 mm
Szállítási > 25 nap
Pillar Kit
Azonosító: FX-PILLAR__KIT
Ár:  €1,020.00
Gyors áttekintés:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Alkatrészszám:  FX-PILLAR/KIT
Raktáron - Kiszállítás 1-2 napon belül
Standoff Adjustable (M8)
Azonosító: FX-HEIGHT
Ár:  €62.00
Gyors áttekintés:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Alkatrészszám:  FX-HEIGHT
  • Hosszúság:  50 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Support Kit
Azonosító: FX-KINKIT
Ár:  €262.00
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Alkatrészszám:  FX-KINKIT
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M8)
Azonosító: FX-CONE
Ár:  €22.00
Gyors áttekintés:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Alkatrészszám:  FX-CONE
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Angle Block Slider (M4)
Azonosító: FV-ANGSLIDER
Ár:  €22.00
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Alkatrészszám:  FV-ANGSLIDER
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 500x500x12mm (M8)
Azonosító: FX-BP500__500
Ár:  €1,520.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP500/500
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 600x600x12mm (M8)
Azonosító: FX-BP600__600
Ár:  €1,900.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP600/600
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff Pin (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__PIN
Ár:  €19.00
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Alkatrészszám:  FV-SO/PIN
  • Hosszúság:  10 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Corner Bracket
Azonosító: FV-CNRBRKT
Ár:  €52.00
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Alkatrészszám:  FV-CNRBRKT
Raktáron - Kiszállítás 1-2 napon belül
Universal Clamp (M8)
Azonosító: FX-CLAMP
Ár:  €129.00
Gyors áttekintés:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Alkatrészszám:  FX-CLAMP
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Single
Azonosító: FV-VEE
Ár:  €32.00
Gyors áttekintés:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Alkatrészszám:  FV-VEE
Raktáron - Kiszállítás 1-2 napon belül
Tension Post (M4)
Azonosító: FV-POST
Ár:  €19.00
Gyors áttekintés:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Alkatrészszám:  FV-POST
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Basic Kit
Azonosító: FX-BASIC__KIT
Ár:  €475.00
Gyors áttekintés:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Alkatrészszám:  FX-BASIC/KIT
  • Menet:  M8
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
Azonosító: FC-125SS3
Ár:  €1,220.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125SS3
  • Befogó tokmány külső átmérője (D1):  125mm
  • Külső befogási tartomány (A):  1 - 126mm
  • Belső befogási tartomány (I):  32 - 122mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
Azonosító: FC-125AL6
Ár:  €1,220.00
Gyors áttekintés:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-125AL6
  • Befogó tokmány külső átmérője (D1):  125mm
  • Befogási tartomány:  5 - 156mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
Azonosító: FC-160AL6
Ár:  €1,490.00
Gyors áttekintés:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Alkatrészszám:  FC-160AL6
  • Befogó tokmány külső átmérője (D1):  160mm
  • Befogási tartomány:  5 - 196mm
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül