text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Kinematic Fixture Plate 300x300 mm (M8)
Azonosító: KPT-300__300
Ár:  CHF815.00
Gyors áttekintés:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Alkatrészszám:  KPT-300/300
  • Lemez kompatibilitás:  KB-250/250, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  CHF10.00
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Alkatrészszám:  FX-THUMB
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  CHF10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Hosszúság:  20 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M4)
Azonosító: FV-CONE
Ár:  CHF15.00
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Alkatrészszám:  FV-CONE
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 25 mm)
Azonosító: FV-SO8__25
Ár:  CHF10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/25
  • Hosszúság:  25 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Baseplate Retaining Screw (M8)
Azonosító: FX-BPRTR
Ár:  CHF6.00
Gyors áttekintés:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Alkatrészszám:  FX-BPRTR
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 15 mm)
Azonosító: FV-SO8__15
Ár:  CHF10.00
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/15
  • Hosszúság:  15 mm
  • Átmérő:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  CHF5,330.00
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Alkatrészszám:  GB0096-2001
  • Koordináta-mérőgép kompatibilitás:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Szoftver-kompatibilitás:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Futamidő:  Hossz ellenőrzés: 20 perc, Gyűrű ellenőrzés: 5 perc, Gömb ellenőrzés: 5 perc, Csukló / mérőfej ellenőrzés: 10 perc
  • Méretek:  Length Bar Length = 300 mm, Gyűrűetalon átmérője = 25 mm, Gömb átmérő = 25 mm
Szállítási > 25 nap
Kinematic Fixture Plate 300x300mm (Plain)
Azonosító: KPP-300__300
Ár:  CHF546.00
Gyors áttekintés:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Alkatrészszám:  KPP-300/300
  • Lemez kompatibilitás:  KB-250/250, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  CHF930.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Alkatrészszám:  FX-BP300/400
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 500x500mm (Plain)
Azonosító: KPP-500__500
Ár:  CHF835.00
Gyors áttekintés:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Alkatrészszám:  KPP-500/500
  • Lemez kompatibilitás:  KB-400/400, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  CHF33.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTSML
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Vee Locator
Azonosító: FV-FEMALE
Ár:  CHF33.00
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Alkatrészszám:  FV-FEMALE
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  CHF47.00
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Alkatrészszám:  FV-VEETWIN
Raktáron - Kiszállítás 1-2 napon belül
Spring Clamp (M8)
Azonosító: FX-SPRING
Ár:  CHF50.00
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Alkatrészszám:  FX-SPRING
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Azonosító: FV-GUIDE480
Ár:  CHF262.00
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Alkatrészszám:  FV-GUIDE480
  • Lemez kompatibilitás:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Raktáron - Kiszállítás 1-2 napon belül
Cone Adjustable (M4)
Azonosító: FV-CONEADJ
Ár:  CHF22.00
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Alkatrészszám:  FV-CONEADJ
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  CHF18.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/20
  • Hosszúság:  20 mm
  • Átmérő:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  CHF84.00
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Alkatrészszám:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  CHF33.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Alkatrészszám:  FX-CTMED
  • Menet:  Menet nélküli
Raktáron - Kiszállítás 1-2 napon belül