text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Cena:  436,00 £
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Odeslání do 10-15 dnů
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Cena:  509,00 £
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Odeslání do 10-15 dnů
Standoff Support (M8)
ID: FX-SO__SUPP
Cena:  20,00 £
Rychlý přehled:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FX-SO/SUPP
  • Longueur:  10 mm
  • Diamètre:  15 mm
Skladem - Odeslání do 1-2 dnů
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Cena:  20,00 £
Rychlý přehled:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Référence:  FX-SO/PIN
  • Longueur:  20 mm
  • Diamètre:  16 mm
Skladem - Odeslání do 1-2 dnů
Vee Locator
ID: FV-FEMALE
Cena:  30,00 £
Rychlý přehled:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
Skladem - Odeslání do 1-2 dnů
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  254,00 £
Rychlý přehled:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Skladem - Odeslání do 1-2 dnů
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  20,00 £
Rychlý přehled:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  35,00 £
Rychlý přehled:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FV-LATSML
  • Longueur:  10 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Cena:  540,00 £
Rychlý přehled:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200P
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  2 300,00 £
Rychlý přehled:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-FULLKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
Skladem - Odeslání do 1-2 dnů
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  20,00 £
Rychlý přehled:  The angle block slider enables users to position elements horizontally on the base plate.
  • Référence:  FV-ANGSLIDER
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
Corner Bracket
ID: FV-CNRBRKT
Cena:  47,00 £
Rychlý přehled:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Référence:  FV-CNRBRKT
Skladem - Odeslání do 1-2 dnů
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  580,00 £
Rychlý přehled:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200F
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
Resting Cone (M4)
ID: FV-CONE
Cena:  14,00 £
Rychlý přehled:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FV-CONE
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  1 109,00 £
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Skladem - Odeslání do 1-2 dnů
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Cena:  1 198,00 £
Rychlý přehled:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Skladem - Odeslání do 1-2 dnů
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Cena:  1 565,00 €
Rychlý přehled:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Skladem - Odeslání do 1-2 dnů
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Cena:  3 715,00 €
Rychlý přehled:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Skladem - Odeslání do 1-2 dnů
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Cena:  1 565,00 €
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Skladem - Odeslání do 1-2 dnů
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  987,00 €
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-70SS3
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
Skladem - Odeslání do 1-2 dnů