text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Cena:  471,00 CHF
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Czas dostawy 10-15 dni
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Cena:  550,00 CHF
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Czas dostawy 10-15 dni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  18,00 CHF
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Référence:  FV-SO/PIN
  • Longueur:  10 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Cena:  50,00 CHF
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Référence:  FV-CNRBRKT
W magazynie - wysyłka w ciągu 1-2 dni
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Cena:  125,00 CHF
Szybki Podgląd:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Référence:  FX-CLAMP
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Single
Vee Block Single
ID: FV-VEE
Cena:  31,00 CHF
Szybki Podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Référence:  FV-VEE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Cena:  18,00 CHF
Szybki Podgląd:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Référence:  FV-POST
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  458,00 CHF
Szybki Podgląd:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Référence:  FX-BASIC/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  580,00 CHF
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200F
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  138,00 CHF
Szybki Podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Référence:  FX-ARM
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  17,00 CHF
Szybki Podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FV-SLIDER
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  17,00 CHF
Szybki Podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Référence:  FV-SO/MAG
  • Longueur:  10 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Cena:  45,00 CHF
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Référence:  FV-SPRING
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  15,00 CHF
Szybki Podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FV-CONE
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Cena:  406,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Cena:  460,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Cena:  353,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Référence:  FC-JS-70SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Cena:  406,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Cena:  460,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Cena:  CHF710.00
Szybki Podgląd: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Référence:  FC-JS-125AL6-IE
  • Matériau:  Aluminium, hard anodised
Czas dostawy 10-15 dni