text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
SKU: GB0122-0019
Prix:  471,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Available
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
SKU: GB0122-0008
Prix:  550,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Available
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
SKU: FV-SO__PIN
Prix:  18,00 CHF
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Référence:  FV-SO/PIN
  • Longueur:  10 mm
  • Diamètre:  8 mm
En stock
Corner Bracket
Corner Bracket
SKU: FV-CNRBRKT
Prix:  50,00 CHF
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Référence:  FV-CNRBRKT
En stock
Universal Clamp (M8)
Universal Clamp (M8)
SKU: FX-CLAMP
Prix:  125,00 CHF
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Référence:  FX-CLAMP
  • Filetage:  M8
En stock
Vee Block Single
Vee Block Single
SKU: FV-VEE
Prix:  31,00 CHF
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Référence:  FV-VEE
En stock
Tension Post (M4)
Tension Post (M4)
SKU: FV-POST
Prix:  18,00 CHF
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Référence:  FV-POST
  • Filetage:  M4
En stock
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
SKU: FX-BASIC__KIT
Prix:  458,00 CHF
Vue d'ensemble sommaire:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Référence:  FX-BASIC/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
En stock
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
SKU: FV-BP200__200F
Prix:  580,00 CHF
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200F
  • Filetage:  M4
En stock
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
SKU: FX-ARM
Prix:  138,00 CHF
Vue d'ensemble sommaire:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Référence:  FX-ARM
  • Filetage:  M8
En stock
Slider Block (M4)
Slider Block (M4)
SKU: FV-SLIDER
Prix:  17,00 CHF
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FV-SLIDER
  • Filetage:  M4
En stock
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
SKU: FV-SO__MAG
Prix:  17,00 CHF
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Référence:  FV-SO/MAG
  • Longueur:  10 mm
  • Diamètre:  8 mm
En stock
Spring Clamp (M4)
Spring Clamp (M4)
SKU: FV-SPRING
Prix:  45,00 CHF
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Référence:  FV-SPRING
  • Filetage:  M4
En stock
Resting Cone (M4)
Resting Cone (M4)
SKU: FV-CONE
Prix:  15,00 CHF
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FV-CONE
  • Filetage:  M4
En stock
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
SKU: FC-JS-125SS3-I
Prix:  $569.49
Vue d'ensemble sommaire: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Available
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
SKU: FC-JS-160SS3-I
Prix:  $644.52
Vue d'ensemble sommaire: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Available
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
SKU: FC-JS-70SS3-E
Prix:  $494.46
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Référence:  FC-JS-70SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Available
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
SKU: FC-JS-125SS3-E
Prix:  $569.49
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Available
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
SKU: FC-JS-160SS3-E
Prix:  $644.52
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Available
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
SKU: FC-JS-125AL6-IE
Prix:  $995.07
Vue d'ensemble sommaire: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Référence:  FC-JS-125AL6-IE
  • Matériau:  Aluminium, hard anodised
Available