text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Prezzo:  471,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Tempi di consegna 10-15 Giorni
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Prezzo:  550,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Tempi di consegna 10-15 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1 180,00 €
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125mm
  • Plage de fixation:  5 - 156mm
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  900,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  32,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
Disponibile - Spedizione in 1-2 Giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  49,00 €
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Référence:  FX-SPRING
  • Filetage:  Sans filetage
Disponibile - Spedizione in 1-2 Giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  10,00 €
Descrizione:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Référence:  FX-THUMB
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  17,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO16/20
  • Longueur:  20 mm
  • Diamètre:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  82,00 €
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Référence:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  32,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Référence:  FX-CTMED
  • Filetage:  Sans filetage
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  750,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  23,00 £
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO16/100
  • Longueur:  100 mm
  • Diamètre:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  29,00 £
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Référence:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  53,00 £
Descrizione:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Référence:  FX-SUB45/120
  • Taille:  120 x 45 x 12 mm
Disponibile - Spedizione in 1-2 Giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  76,00 £
Descrizione:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Référence:  FX-SUP/STOP
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prezzo:  47,00 £
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FX-LATMED
  • Longueur:  20 mm
  • Diamètre:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prezzo:  891,00 £
Descrizione:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-BRONZE/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  38,00 £
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/150
  • Taille:  30 x 30 x 150 mm
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prezzo:  24,00 £
Descrizione:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Référence:  FX-POST
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prezzo:  936,00 £
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/400
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni