text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Cena:  2 064,00 zł
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Czas dostawy 10-15 dni
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Cena:  2 408,00 zł
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Czas dostawy 10-15 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  5 246,00 zł
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Cena:  5 667,00 zł
Szybki Podgląd:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Cena:  4 902,00 zł
Szybki Podgląd:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Cena:  1 140,00 €
Szybki Podgląd: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Czas dostawy 10-15 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 €
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  33,00 €
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  47,00 €
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  279,00 €
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  22,00 €
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  39,00 €
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FV-LATSML
  • Longueur:  10 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  18,00 €
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FV-SOSUP
  • Longueur:  6 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  1 145,00 €
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/400
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  1 254,00 €
Szybki Podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-STARTERKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/15
  • Longueur:  15 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  2 530,00 €
Szybki Podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-FULLKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
W magazynie - wysyłka w ciągu 1-2 dni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Cena:  420,00 €
Szybki Podgląd:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Référence:  FV-SLIDE
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Cena:  605,00 €
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200C
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni