text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Cena:  560,00 CHF
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Odeslání do 10-15 dnů
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Cena:  480,00 CHF
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Odeslání do 10-15 dnů
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 CHF
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  33,00 CHF
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
Skladem - Odeslání do 1-2 dnů
Vee Block Twin
ID: FV-VEETWIN
Cena:  47,00 CHF
Rychlý přehled:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Skladem - Odeslání do 1-2 dnů
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  279,00 CHF
Rychlý přehled:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  33,00 CHF
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Référence:  FX-CTMED
  • Filetage:  Sans filetage
Skladem - Odeslání do 1-2 dnů
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  819,00 CHF
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  39,00 CHF
Rychlý přehled:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FV-LATSML
  • Longueur:  10 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  1 061,00 CHF
Rychlý přehled:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-BRONZE/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  10,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/25
  • Longueur:  25 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Standoff Support (M4)
ID: FV-SOSUP
Cena:  18,00 CHF
Rychlý přehled:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FV-SOSUP
  • Longueur:  6 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  1 145,00 CHF
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/400
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  1 955,00 CHF
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/600
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů
Centering Pin
ID: FV-MALE
Cena:  24,00 CHF
Rychlý přehled:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Référence:  FV-MALE
  • Filetage:  M4
Skladem - Odeslání do 1-2 dnů
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Cena:  6,00 CHF
Rychlý přehled:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Référence:  FX-BPRTR
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  1 254,00 CHF
Rychlý přehled:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-STARTERKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  10,00 CHF
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/15
  • Longueur:  15 mm
  • Diamètre:  8 mm
Skladem - Odeslání do 1-2 dnů
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Cena:  19,00 CHF
Rychlý přehled:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Référence:  FX-CAPM8/16
  • Filetage:  M8
Skladem - Odeslání do 1-2 dnů