text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  1 220,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prijs:  1 318,00 €
Beknopt overzicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1 565,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prijs:  1 420,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prijs:  1 140,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prijs:  1 490,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prijs:  3 300,00 €
Beknopt overzicht:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3-NF
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prijs:  1 140,00 €
Beknopt overzicht: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Référence:  FC-125SS3-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  1 004,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  33,00 €
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  279,00 €
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  10,00 €
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  22,00 €
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  819,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  1 061,00 €
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-BRONZE/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  10,00 €
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/25
  • Longueur:  25 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  € 18,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FV-SOSUP
  • Longueur:  6 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  € 1.145,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/400
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  € 594,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200P
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  € 1.955,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/600
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen