text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET
SWIFT-SET
N° : GB0122-1000
Prix:  8 140,00 CHF
Vue d'ensemble sommaire: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Comptabilité:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  466,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  540,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Livraison sous 10 à 15 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  884,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  14,00 CHF
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
N° : FX-CTMED
Prix:  31,00 CHF
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Filetage:  Sans filetage
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  695,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
N° : FV-LATSML
Prix:  32,00 CHF
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  10 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
N° : FX-BRONZE__KIT
Prix:  968,00 CHF
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
N° : FV-SO8__25
Prix:  9,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  25 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Standoff Support (M4)
Standoff Support (M4)
N° : FV-SOSUP
Prix:  14,00 CHF
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  6 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
N° : FX-BP400__400
Prix:  1 011,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  1 821,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  13,00 CHF
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Corner Bracket
Corner Bracket
N° : FV-CNRBRKT
Prix:  49,00 CHF
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  107,00 CHF
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
N° : FC-JS-125SS3-I
Prix:  401,00 CHF
Vue d'ensemble sommaire: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Livraison sous 10 à 15 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
N° : FC-125SS3
Prix:  1 160,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  125mm
  • Plage de serrage extérieur (A):  1 - 126mm
  • Plage de serrage intérieur (I):  32 - 122mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
N° : FC-240AL3
Prix:  3 300,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  240mm
  • Plage de serrage extérieur (A):  1 - 288mm
  • Plage de serrage intérieur (I):  35 - 295mm
  • Matériau:  Aluminium
  • Fixation:  M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
N° : FC-160SS3
Prix:  1 430,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  160mm
  • Plage de serrage extérieur (A):  1 - 150mm
  • Plage de serrage intérieur (I):  34 - 174mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours