text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5 346,88 £
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Référence:  GB0096-2001
  • Compatibilité MMT:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilité logicielle:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Diamètre de bague = 25 mm, Diamètre de la boule = 25 mm
Consegna > 25 giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  33,44 £
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  263,12 £
Descrizione:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Disponibile - Spedizione in 1-2 Giorni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  22,00 £
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  38,72 £
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FV-LATSML
  • Longueur:  10 mm
  • Diamètre:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Centering Pin
Centering Pin
ID: FV-MALE
Prezzo:  23,76 £
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Référence:  FV-MALE
  • Filetage:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2 377,76 £
Descrizione:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-FULLKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  22,00 £
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Référence:  FV-ANGSLIDER
  • Filetage:  M4
Disponibile - Spedizione in 1-2 Giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  51,92 £
Descrizione:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Référence:  FV-CNRBRKT
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1 224,08 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1 224,08 £
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1 495,12 £
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  3 451,36 £
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  1 495,12 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  943,36 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-70SS3
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  932,80 £
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-70SS3-NF
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prezzo:  1 424,72 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prezzo:  1 144,00 £
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prezzo:  1 495,12 £
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation (G):  M6
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prezzo:  3 310,56 £
Descrizione:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3-NF
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Tempi di consegna 10-15 Giorni