text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  1 219,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  1 022,35 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 400x400x12mm (M8)
N° : FX-BP400__400
Prix:  1 389,20 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/400
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
N° : FV-BP200__200P
Prix:  733,70 CHF
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200P
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  2 490,90 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP600/600
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Pillar Kit
N° : FX-PILLAR__KIT
Prix:  1 337,45 CHF
Vue d'ensemble sommaire:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Référence:  FX-PILLAR/KIT
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
N° : FX-THUMB
Prix:  12,65 CHF
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Référence:  FX-THUMB
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  12,65 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 25 mm)
N° : FV-SO8__25
Prix:  12,65 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/25
  • Longueur:  25 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Baseplate Retaining Screw (M8)
N° : FX-BPRTR
Prix:  8,05 CHF
Vue d'ensemble sommaire:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Référence:  FX-BPRTR
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 15 mm)
N° : FV-SO8__15
Prix:  12,65 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/15
  • Longueur:  15 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
N° : FV-CONE
Prix:  19,55 CHF
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FV-CONE
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
SWIFT-CHECK
N° : GB0096-2001
Prix:  6 987,40 CHF
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Référence:  GB0096-2001
  • Compatibilité MMT:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilité logicielle:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Diamètre de bague = 25 mm, Diamètre de la boule = 25 mm
Livraison > 25 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  1 219,00 CHF
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Référence:  FC-70SS3-NF
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
Livraison sous 10 à 15 jours
3-Jaw 125 Outside Clamping Set (Stainless Steel)
N° : FC-JS-125SS3-E
Prix:  548,55 CHF
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Référence:  FC-JS-125SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Livraison sous 10 à 15 jours
3-Jaw 160 Outside Clamping Set (Stainless Steel)
N° : FC-JS-160SS3-E
Prix:  621,00 CHF
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.

  • Référence:  FC-JS-160SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Livraison sous 10 à 15 jours
6-Jaw 125 Inside/Outside Clamping Set (AL)
N° : FC-JS-125AL6-IE
Prix:  956,80 CHF
Vue d'ensemble sommaire: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.

  • Référence:  FC-JS-125AL6-IE
  • Matériau:  Aluminium, hard anodised
Livraison sous 10 à 15 jours
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
N° : FC-PS-125AL6
Prix:  1 087,90 CHF
Vue d'ensemble sommaire: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).

  • Référence:  FC-PS-125AL6
Livraison sous 10 à 15 jours
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
N° : FC-PS-160AL6
Prix:  1 232,80 CHF
Vue d'ensemble sommaire: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).

  • Référence:  FC-PS-160AL6
Livraison sous 10 à 15 jours
Basic Jaw Set (Aluminium)
N° : FC-JS-240AL3-I
Prix:  1 337,45 CHF
Vue d'ensemble sommaire: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.

  • Référence:  FC-JS-240AL3-I
  • Matériau:  Aluminium with hard coated surface
Livraison sous 10 à 15 jours