text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Precio:  744,00 zł
Descripción rápida:  Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
  • Referencia:  03969487
  • Longitud:  160
  • Diámetro:  19.5
Entrega > 25 días
Safety Pin for HR-MP Rack
ID: 03969488
Precio:  224,00 zł
Descripción rápida:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Referencia:  03969488
  • Longitud:  22
  • Diámetro:  8
Entrega > 25 días
Spring Clamp
ID: FX-SPRING
Precio:  215,00 zł
Descripción rápida: 

Spring clamps securely hold parts with minimal force while maintaining unobstructed measurement access.

  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Thumb Screw M8
ID: FX-THUMB
Precio:  47,00 zł
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Referencia:  FX-THUMB
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  77,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/20
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  112,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/100
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  100 mm
En Stock - Envío 1-2 Días
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Precio:  258,00 zł
Descripción rápida: 

The pillar top plate allows additional Swift-Fix components to be mounted on top of a Swift-Fix pillar.

  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  5.573,00 zł
Descripción rápida: 

The Swift-Fix Starter Kit contains a base plate and a set of basic components for fixture assembly. The components are supplied in a sturdy box, keeping them well organized and readily accessible.

  • Referencia:  FX-STARTER/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Support Stop (M8)
ID: FX-SUP__STOP
Precio:  374,00 zł
Descripción rápida: 

The support stop is used to secure workpieces with adjustable clamping force. By reversing the support stop, it can also be used as a compact V-block.

  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  82,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Precio:  112,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/100
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  100 mm
En Stock - Envío 1-2 Días
Swift-Fix Tool Kit
ID: FX-TOOLS
Precio:  116,00 zł
Descripción rápida:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Referencia:  FX-TOOLS
En Stock - Envío 1-2 Días
Standoff Support (M8)
ID: FX-SO__SUPP
Precio:  95,00 zł
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FX-SO/SUPP
  • Rosca:  M8
  • Diámetro:  15 mm
  • Longitud:  10 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Precio:  77,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/30
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  30 mm
Tiempo de entrega 10-15 días
Universal Joint
ID: FX-UNI__JOINT
Precio:  409,00 zł
Descripción rápida:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator (M8)
ID: FX-VEE
Precio:  331,00 zł
Descripción rápida: 

The Vee locator can be mounted directly on the base plate or on top of standoffs for precise positioning of large workpieces.

  • Referencia:  FX-VEE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  77,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/30
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  30 mm
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Precio:  82,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/50
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  50 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Precio:  82,00 zł
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/50
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  50 mm
En Stock - Envío 1-2 Días
Toggle Clamp M8
ID: FX-TOG
Precio:  598,00 zł
Descripción rápida: 

The M8 threaded toggle clamp made of aluminium and steel, is suitable for applications requiring high clamping force. It is quick and easy to use, applies clamping force in two directions.

  • Referencia:  FX-TOG
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días